Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Custom & Geometric Windows in Coral Springs: What to Know First
PGT custom and geometric windows in Coral Springs typically take two to three weeks from measurement to install depending on the shape, glass package, and whether the opening is load-bearing. As an independent PGT service provider, we quote custom arched, radius, trapezoid, and oversized PGT openings the old way: we measure the rough opening before we quote it, and the number we put on paper is the number you pay. No change orders, no re-quotes after the fact.
If you own a PGT window in Coral Springs and the glass is fogged, the frame is binding, or a geometric unit is leaking around the mortar line, call (727) 261-2215. We will tell you honestly whether that window can be repaired or whether replacement is the smarter money. This page is written for Coral Springs homeowners who have been burned once and want the job done right this time.
Key Takeaways:
- PGT custom and geometric windows need a glazier who understands rough-openings, not just a parts-swapper
- Fogged geometric units are usually an IGU seal failure, not a frame problem
- We register the manufacturer warranty layers in writing before our truck leaves your driveway
- Every job is covered by our Done Right Promise
- Call (727) 261-2215 for a free estimate with no obligation
How PGT Products Fail - and How We Fix Them
PGT makes a solid window, but Coral Springs is not a gentle climate. Salt air, afternoon thunderstorms, and months of UV on the west-facing elevations take their toll. Here is what we see on PGT custom and geometric units in this city, and what we do about it.
- Fogged glass in PGT WinGuard and Premier units. The insulated glass seal fails, moisture gets between the panes, and the window cannot be cleaned from the inside. The frame is usually fine. We replace the IGU, not the entire window, and we use glass packs that match the original tint and low-e coating so the replacement does not look like a patch. Most Coral Springs homeowners do not need a full-window replacement for this.
- Binding sashes on custom arches and radius units. In Coral Springs, soil shifts with the wet-dry cycle, and a radius window that was set true ten years ago can slowly drift out of square. We see sashes that rub at the top of the arc but not the bottom. The fix is often re-shimming, not ripping out the frame. Dale Kessler reads a rough opening before he quotes it, which is why our customers rarely see a change order after the job starts.
- Hardware fatigue on PGT heavy-duty casements and picture windows. The locking mechanisms on big PGT custom picture windows take a beating from wind load and daily use. We replace the hardware with OEM PGT parts when the unit is still under warranty, or with matched aftermarket hardware when OEM is too costly for the age of the window. Either way, we tell you which one we are using and why.
- Weep-hole blockage and water staining on shaped picture windows. Coral Springs gets heavy afternoon storms. PGT shaped picture windows have weep systems that clog with windblown debris, and the water has nowhere to go. We clear the track, flush the weep holes, and check the exterior sealant before we ever talk about replacement.
- Frame cracking at the corners of oversized geometric units. Large trapezoid or half-round PGT frames flex under wind load. We have seen corner welds develop hairline cracks that leak slowly. The repair is a corner rebuild or full-frame replacement depending on the severity, and we will show you the crack before we quote the fix.
Our PGT Custom & Geometric Windows Process
This is what a PGT job looks like when you call TruePane Windows & Doors in Coral Springs.
- 1
You reach a live person. 24/7, a person answers. Not a voicemail tree. We take your name, the rough window location, and what you are seeing.
- 2
We schedule the site visit. A background-checked, uniformed technician arrives on time, measures the rough opening twice, and identifies the PGT series you have.
- 3
We put the options on paper. Repair or replace, OEM or matched aftermarket, with real dollar numbers. You see exactly what you are buying, side by side.
- 4
We do the work. Most repairs are completed in a single visit. Custom geometric replacements happen in one day once the unit is fabricated.
- 5
We register the warranty in writing. Both manufacturer warranty layers, stated durations, before our truck leaves your driveway. That is The Keystone Standard.
- 6
We leave the site clean. Old glass, old sealant, old hardware: it goes with us. You walk the window with our tech before we call it done.
Measure it right the first time, and the rest of the job takes care of itself. That rule has kept us in Coral Springs since 2008, and it applies to every PGT custom and geometric window we touch.
What PGT Custom & Geometric Windows Costs in Coral Springs
Every PGT custom or geometric job is priced differently because the opening, the glass package, and the finish dictate the number. These are the ranges our Coral Springs customers see on most jobs.
- IGU replacement on a PGT WinGuard geometric unit: $275 to $550 per insulated glass unit, depending on size and low-e coating
- Hardware replacement on a PGT casement or picture window: $85 to $240 per window, OEM or matched aftermarket
- Weep-hole clearing and reseal on a shaped PGT window: $145 to $295 per window
- Full custom geometric replacement (arched, radius, trapezoid) in PGT WinGuard or Premier: $1,600 to $4,800 per unit installed, depending on impact rating, glass package, and frame size
- Corner rebuild on an oversized PGT frame: $350 to $800 per corner, when the frame can be saved
What moves the price: impact versus non-impact glass, the size of the IGU, and the condition of the rough opening. Coral Springs homes near the Sawgrass Expressway see more wind load, and some openings need additional shimming to stay true. That work is in the quote, not a surprise on the bill. Call (727) 261-2215 for an exact number.
Why Coral Springs Homeowners Call TruePane Windows & Doors for PGT Work
We are an independent PGT service provider, which means we answer to you, not to a manufacturer’s preferred installer network. We work on PGT WinGuard, Premier, and EnergyVue lines every month in Coral Springs, and we know which failures are worth repairing and which are not. If a PGT repair is not the right move on an older unit, we will tell you that before we touch the glass.
When a replacement makes more sense, we quote other lines side by side: CGI, CWS, ES Windows, and ECO Window Systems included. You see the real numbers for each option on paper, not a sales pitch. Every job is covered by our Done Right Promise, and both manufacturer warranty layers are registered in writing before we leave. That is the standard our founder, Dale Kessler, set when he opened TruePane in 2008, and it is the same standard we hold on every PGT custom and geometric window we service in Coral Springs.
FAQs
Not when we do it. We match PGT’s original glass specifications and use OEM parts when the unit is still under warranty, so your PGT warranty layer stays intact. If the warranty has expired, we use matched aftermarket glass and tell you that on the estimate line, in writing. Call (727) 261-2215 and we will check your warranty status before we quote.
Most custom PGT geometric replacements take two to three weeks from measure to install. The fabrication is the long pole: arches, radius, and trapezoid units are cut to order, not pulled from a warehouse shelf. Once the unit is fabricated, we install it in a single day. Call (727) 261-2215 and we will give you a real timeline for your opening.
Fogged glass on a PGT geometric unit is almost always an IGU seal failure, and the frame is reusable. We replace the insulated glass pack, not the whole window. That saves Coral Springs homeowners thousands over a full replacement. If your frame is cracked or out of square, we will show you that on the inspection and quote the right fix.
Yes. We service PGT windows regardless of who installed them, as long as they are accessible and the frame is sound. We are not affiliated with PGT, but we know their product lines as well as any authorized dealer in Broward County. If you are unsure whether your PGT unit is repairable, call (727) 261-2215 and describe what you are seeing. We will tell you honestly what you are looking at.
It is our written guarantee on every installation: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. No verbal promises, no fine print, no arguing. If the pane is not true, the job is not done. That has been the founding rule at TruePane since day one.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Springs and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.