CGI Roof Replacement & Installation Nationwide | TruePane Windows & Doors

CGI Roof Replacement & Installation in Coral Springs: What to Know First

CGI roof replacement and installation in Coral Springs typically runs between $1,800 and $6,500 depending on whether you’re replacing a single skylight, a full bank of roof glass, or an entire CGI roof system. Most jobs are completed in one to three working days once we’ve measured and ordered the correct CGI components. We quote the work on paper before we start, so you know the full number before the first truck rolls up to your Coral Springs home. If you own a CGI roof product and it needs replacing, call (727) 261-2215 and a live person will answer.

Call (727) 261-2215

This page is written for homeowners in Coral Springs who have a CGI roof product that’s reached the end of its service life, or that’s showing signs of failure they need diagnosed honestly. We’re an independent CGI service provider, not a manufacturer affiliate, so the recommendations we make are based on what’s actually happening with your roof, not on what a corporate warranty department wants us to say.

How CGI Products Fail - and How We Fix Them

CGI builds roof products that hold up well in South Florida, but no glazing system lasts forever. After twenty-plus years of working on homes across Broward County, we know the failure patterns specific to CGI roof installations. Here’s what we see most often in Coral Springs, and what we do about it:

• CGI Sentry Series skylights: perimeter seal breakdown. The Sentry line uses a compression gasket system at the curb that works well until the gasket material loses its memory after ten to fifteen years of summer heat. Water doesn’t pour in all at once. It seeps, stains the ceiling, and the homeowner chalks it up to a roof leak. The real fix is removing the skylight, replacing the curb gasket with the correct durometer compound, and re-torquing the compression screws to CGI’s factory spec. Re-sealing the outside with silicone doesn’t fix it, and we tell owners that before they spend money on a temporary repair.
• CGI Estate Collection roof glass: condensation between panes. This is the failure mode owners write off as “just Florida humidity” when it’s actually a seal failure in the insulated glass unit. Once the desiccant inside the spacer bar is saturated, there’s no way to dry it out from the outside. We replace the IGU with a matched unit, which matters because CGI uses Low-E coatings that need to match the existing glass or you’ll end up with one pane that looks different from the others. Off-the-shelf replacement glass from a supply house won’t match correctly, and we’ve seen homeowners live with mismatched roof glass for years because a previous contractor didn’t flag the issue.
• CGI Flat-Glass Roof Panels: stress cracks from wind-borne debris. Coral Springs sits far enough inland that we don’t get the worst storm surge, but wind-driven debris still hits roofs hard during hurricane season. CGI’s laminated glass handles impact well, but the outer lite can develop stress cracks that spread slowly. Homeowners don’t always notice until a crack runs across the panel and the laminate layer is the only thing holding the glass together. We replace the full laminated unit, not just the outer lite, because the interlayer’s integrity is compromised once it’s been exposed to the elements through a cracked outer pane.
• CGI SunShield Series: hardware fatigue on venting roof windows. The SunShield venting units have a crank and hinge mechanism that works fine until corrosion from salt air and humidity pits the moving parts. You’ll hear a grinding noise or feel the crank bind before it fails completely. We replace the operator and hinge set with factory-matched parts, and we apply a marine-grade lubricant to the new hardware before we close the unit back up. Don’t force a stiff crank. That’s how you strip the gear and turn a $400 hardware job into a $900 full-unit replacement.
• CGI Heritage Series roof lanterns: failed weather-stripping at the ridge. The Heritage line has multiple glass sections meeting at a center ridge, and the weather-stripping at those intersections takes the brunt of every storm. Once the strips compress and lose elasticity, water finds its way in along the ridge line. We disassemble the ridge, clean the channels, install new weather-stripping, and re-seat every panel in sequence. The sequence matters: if you reseat panels out of order, you shift the ridge cap out of alignment and the leak comes back.

Our CGI Roof Replacement & Installation Process

1. 1
   Call and speak to a person. No phone tree, no callback form. When you call (727) 261-2215, someone answers. We’ll ask what you’re seeing, when you first noticed it, and whether the roof product is original to the home.
2. 2
   On-site inspection and measurement. One of our uniformed technicians comes out to Coral Springs, examines the roof product, and takes exact measurements. Dale Kessler’s rule applies here: measure it right the first time, and the rest of the job takes care of itself. We don’t quote a job before we’ve read the rough opening.
3. 3
   Quote on paper, side by side. We price the job with OEM CGI parts and with quality aftermarket options where they make sense. You see both numbers, in writing, before you decide. No surprise line items later.
4. 4
   Parts ordered and scheduled. OEM CGI parts typically arrive in five to ten business days. We schedule the installation once the parts are in hand, not before. That way your roof isn’t opened up and left waiting if a shipment runs late.
5. 5
   Replacement and re-seating. We remove the old unit, prep the curb or opening, set the new glass with the correct gaskets and sealants, and torque everything to CGI’s factory specifications. We clean up the site before we leave.
6. 6
   Test and register. We run water over the install, check the operation of any moving parts, and confirm the seal is complete. Then we register both warranty layers in writing and hand you the paperwork. If something’s not right within 90 days, we come back and make it right. No arguing.

What CGI Roof Replacement & Installation Costs in Coral Springs

CGI roof work isn’t cheap, and honest numbers save you from a nasty surprise later. Here’s what we quote in Coral Springs:

• Single CGI Sentry skylight replacement (fixed unit): $1,800 to $2,600
• Single CGI SunShield venting skylight replacement: $2,400 to $3,400
• CGI roof glass panel replacement (per panel): $800 to $1,500 depending on size and glass type
• Full CGI roof system replacement (multi-panel or roof lantern): $4,500 to $6,500
• Hardware or gasket repair on existing CGI unit (no glass replacement): $300 to $700

What moves the price: roof access difficulty, single-story versus second-story work, whether the curb or framing needs repair, and whether we’re using OEM CGI parts or a quality aftermarket alternative. We’ll walk you through all of that on paper before any work begins. Call (727) 261-2215 for a free estimate on your Coral Springs home.

Why Coral Springs Homeowners Call TruePane Windows & Doors for CGI Work

We’ve been in this business in Broward County for a long time, and the homes in Coral Springs tell us the story. Dale Kessler grew up in the Ramblewood neighborhood of Coral Springs, and the heat, the storms, and the particular way South Florida sun degrades roof glazing is not abstract to us. It’s what we’ve been looking at our whole lives. Every CGI job we take gets the same standard: both manufacturer warranty layers registered in writing before our truck leaves your driveway, and a Done Right Promise that means if the work isn’t right, we fix it without paperwork fights. If you own a CGI roof product but your installer also worked with PGT, CWS, ES Windows, or ECO Window Systems, we know those lines too and we’ll tell you honestly if a repair makes more sense than a replacement. We’re not the cheapest bid in town, and we don’t pretend to be. We’re the call you make when you want the job done once.

FAQs