Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Impact Garage Doors in Coral Springs: What to Know First
Independent ES Windows impact garage door service in Coral Springs runs $280 to $3,800 depending on whether we’re replacing rollers, rebuilding a track assembly, or installing a full hurricane-rated door. We complete most ES Windows repairs in a single visit, and we carry the load-rated aluminum tracks, reinforced corner brackets, and mullion fasteners that ES Windows had specified for Impact Series and Series 395 garage door applications. We’re not the cheapest bid in Coral Springs, and we’re not trying to be. If you own an ES Windows product and want the repair done against the manufacturer’s instructions rather than around them, call (727) 261-2215.
This page is for Coral Springs homeowners who already have ES Windows impact doors in their home and need honest talk about what breaks, what it costs, and whether a repair is worth doing before a full replacement. Dale Kessler grew up in the Ramblewood neighborhood of Coral Springs, so we know what these doors go through every hurricane season.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid impact product, but every manufacturer has weak points. Here’s what we see on Coral Springs service calls, and what we do about it.
- Roller wear on Impact Series doors with aftermarket track kits. ES Windows Impact Series doors ship with a specific roller diameter matched to the track profile. When a previous contractor used a generic track kit, the rollers wear oblong within two or three years, and the door starts to shudder on the way up. We source the correct OEM roller and align the track to handle Coral Springs humidity without binding in July.
- Weatherstripping compression at the sill on Series 395 doors. The double-panel perimeter seal on Series 395 loses its rebound after five or six summers of direct sun exposure, which lets water pool at the track base during storms. We replace the seal with the OEM compression profile, not the flat aftermarket strip that reduces the impact rating.
- Corner bracket fractures on the lower impact panel. Coral Springs homes on the east side near the former golf courses get wind gusts that torque the lower corner brackets. The OEM bracket is engineered to flex; the aftermarket version cracks. We stock the OEM bracket and torque it to manufacturer spec.
- Mullion post loosening where the walkthrough door meets the garage panel. On ES Windows impact garage doors with integrated pedestrian doors, the mullion bolts back out with seasonal expansion cycles. Most calls we get for “the door seems spongy” trace to this. We re-seat and re-torque with the correct hardware instead of welding it solid, which would void the frame warranty.
- Track misalignment from concrete settling. Coral Springs is built on reclaimed Everglades muck in some neighborhoods, and garage slabs move. The top track hangs, the rollers bind, and the homeowner thinks the whole door is shot. We reset the track on packers and shims to bring the opening back to plumb, which is a lot cheaper than replacing the door.
Our ES Windows Impact Garage Doors Process
- 1
Call and talk to a person. A live person answers at (727) 261-2215. You describe what the door is doing. We ask the right questions the first time: model line, age of door, when the problem started.
- 2
We inspect the opening before we quote. A background-checked, uniformed technician measures the rough opening twice and reads the existing hardware. Dale Kessler’s rule applies here: measure it right the first time, and the rest of the job takes care of itself.
- 3
We give you options on paper. OEM or quality aftermarket parts, repair or replace, with prices side by side. You decide. No surprise line items later.
- 4
The repair or install. Most jobs are done in a single visit. We set the panels, retension the balance system if needed, and torque every bracket to spec. Safety note: garage door springs and cables carry enough tension to cause serious injury. This is work for a trained professional with the right tools, not a weekend ladder and a socket set.
- 5
Testing before we leave. We run the door through full cycles, check the balance, test the impact seal compression, and confirm the wind-load hardware is seated.
- 6
Warranty layers registered in writing. We hand you the paperwork showing both manufacturer warranty layers registered, with durations stated. Then we walk the job with you before we leave the driveway.
What ES Windows Impact Garage Doors Costs in Coral Springs
Here’s what we bill in the Coral Springs market. These are honest ranges, not bait.
- Roller and hinge replacement on an ES Windows Impact Series door: $280-$480 installed, depending on how many rollers and whether the hinges are OEM.
- Track alignment and reset on one side: $180-$350. Includes shim work and re-torquing the corner brackets.
- Weatherstripping replacement on a Series 395 sill run: $220-$400, OEM seal and labor.
- Full impact garage door replacement with ES Windows hardware: $2,800-$3,800 for a standard two-car opening, depending on panel line and finish.
What moves the price: whether the existing track is salvageable, whether the concrete has settled enough to need re-shimming, and whether the panel damage requires replacing one section or the whole run. We give you the number before work starts and we hold it. Call (727) 261-2215 for a free estimate with actual numbers.
Why Coral Springs Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been serving Coral Springs since 2008 through a craft tradition that started with Dale Kessler’s father resealing jalousie windows against summer storms. TruePane Windows & Doors was founded in 2008 on a principle that out-of-true installs and voided warranties were problems worth fixing permanently. Every ES Windows job carries the Done Right Promise. If it’s not done right, we make it right, no paperwork, no arguing. The Keystone Standard means both warranty layers get registered in writing before the truck leaves your driveway. And because we’re authorized installers for PGT, CGI, CWS, and ECO Window Systems in addition to ES Windows, we can show you side-by-side options if replacement ever makes more sense than repair. A live person answers our phone 24 hours a day. We’ll be there when we say.
FAQs
No, as long as the repair uses parts that match the original specification and the work is done by a qualified installer. As an independent ES Windows service provider, we’re careful to source OEM components and follow manufacturer torque and alignment standards precisely, which keeps your warranty intact. Call (727) 261-2215 if you want us to look at your paperwork before we start.
We carry the common wear items for ES Windows Impact Series and Series 395 doors: OEM rollers, corner brackets, compression weatherstripping, and mullion hardware. Obscure trim pieces or discontinued finish panels may take a few days to source. Call (727) 261-2215 and we’ll tell you straight what we have on the truck.
If the panels are sound, the track is straight, and the failure is a wear item like rollers, seals, or a bracket, repair almost always makes more financial sense. Replacement becomes the better call when panel delamination or frame corrosion has compromised the impact rating. We’ll show you both numbers on paper and let you decide.
Most repairs take two to four hours on site and are completed in a single visit. Full door replacement with ES Windows products is generally a one-day job for a standard two-car opening. We’ll give you a straight time window when you schedule.
Yes. We offer a permanent 5% discount for seniors and veterans, plus a free written repair estimate. No fine print. Just a square deal for the people who’ve earned it.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Springs and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After