Mr-Glass Impact Windows Nationwide | TruePane Windows & Doors

Mr-Glass Impact Windows in Coral Springs: What to Know First

We service Mr-Glass impact windows in Coral Springs as an independent Mr-Glass service provider, not as a manufacturer-authorized dealer. Most Mr-Glass impact window repairs and replacements run one to two weeks from first call to finished install, depending on whether we’re matching existing glass or setting new frames. Pricing is straightforward: you’ll get a written line-item quote before any work starts, and the price on that quote is the price you pay.

Call (727) 261-2215

This page is for Coral Springs homeowners who already have Mr-Glass windows or doors and need straight answers about repairs, replacement glass, and what it actually costs to keep those openings storm-ready. If you’re researching before a purchase, you’ll find the same specifics useful. Call (727) 261-2215 any time, any day, and a live person answers.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass impact windows hold up well in Broward County’s climate when they’re installed correctly and maintained. When they fail, it’s usually for one of five reasons we see repeatedly on service calls across Coral Springs:

• Roller drag on Mr-Glass horizontal sliders in older Coral Springs homes. On houses built before the city’s 2001 building code update, we find Mr-Glass slider tracks that were never shimmed level at the rough opening. The door or window gets progressively harder to operate, and homeowners assume the rollers are shot. Often the track has settled with the slab, and the fix is re-leveling the track before replacing rollers. We measure the opening twice, check the track with a straightedge, and correct the foundation issue first.
• Fogging between panes on Mr-Glass insulated impact units. This is a seal failure, not a cleaning problem. Coral Springs humidity finds every weak edge seal eventually, and once moisture is inside the glass pack, the low-E coating starts to degrade. There’s no field repair that restores a failed IG unit. We replace the affected pane or the entire sash with a fresh glass pack sized to the original frame, and we register the new warranty layers in writing before we leave the driveway.
• Handle and lock misalignment on Mr-Glass casement and awning operators. Over years of South Florida heat cycling, the hardware loosens and the sash drops a fraction of an inch. The lock then binds against the strike plate. The shortcut is filing the strike plate, which weakens it over time. We reset the sash with new hinge hardware when needed, so the lock engages square and the weather stripping compresses evenly. The window closes true again.
• Frame corrosion at the bottom corners of Mr-Glass aluminum fixed windows. Coral Springs sits far enough from the coast that salt spray isn’t the culprit; what we see is years of sprinkler overspray hitting the lower rail. Aluminum plus reclaimed irrigation water equals pitting and eventual structural weakness at the corners. If the pitting hasn’t compromised the frame, we clean and reseal it. If it has, we replace the frame section rather than patching a weakening structural member.
• Interior water stains below Mr-Glass fixed picture windows. Most of the time, the glass and the frame are fine. The culprit is the original caulking bead between frame and stucco, which shrinks and cracks over twenty summers. Water follows the crack, not through the window. We strip the old sealant, backer-rod the gap, and apply a commercial-grade sealant rated for South Florida UV exposure. The leak stops because the entry point is closed.

Our Mr-Glass Impact Windows Process

Here’s how a Mr-Glass job goes from first call to final walkthrough, start to finish.

1. 1
   Call and talk to a person. You reach us at (727) 261-2215. We ask what you’re seeing, what the window or door is doing, and whether it’s an emergency or a planned repair. We schedule the visit that week.
2. 2
   On-site diagnosis. A background-checked, uniformed technician arrives, measures the rough opening, checks the frame, the glass, the hardware, and the seal. We read the opening before we quote; that’s why our change orders are rare.
3. 3
   Parts decision on paper. We show you OEM versus quality aftermarket options as line items on the same quote sheet. You see exactly what each path costs and what each warranty covers. No waiting on a callback from a parts supplier to give you a number.
4. 4
   Repair or replacement. For repairable issues, we complete most fixes in one visit. For glass pack or frame replacements, we order the correct parts, confirm lead time, schedule the install, and show up when we say.
5. 5
   Test and register. We cycle the window or door through its full range, check the locks, check the seals, and verify the glass sits square. Both manufacturer warranty layers get registered in writing that day.
6. 6
   Cleanup and walkthrough. We leave the opening cleaner than we found it, run through what was done, what’s covered, and for how long. The job isn’t done until the pane is true.

What Mr-Glass Impact Windows Costs in Coral Springs

Mr-Glass impact window work in Coral Springs depends on the failure and the opening. Here’s what we quote most often, in real ranges:

• Glass pack replacement for a failed Mr-Glass insulated impact unit: $380 to $780 per pane, depending on glass size and low-E coating.
• Hardware reset for Mr-Glass casement or awning operators: $140 to $320 per window, hinge replacement included when needed.
• Track re-level and roller replacement on Mr-Glass sliders: $180 to $420 per panel.
• Full Mr-Glass impact window replacement (frame and glass, standard sizes): $900 to $2,400 per opening, installed.
• Frame section replacement due to corner corrosion: $600 to $1,500 depending on section size and accessibility.

What moves the price is glass size, whether the frame is salvageable, and whether the opening is a standard or custom dimension. We also offer a permanent 5% discount for seniors and veterans. Call (727) 261-2215 for a free estimate with exact numbers for your windows.

Why Coral Springs Homeowners Call TruePane Windows & Doors for Mr-Glass Work

TruePane Windows & Doors has been serving Coral Springs and surrounding Broward County communities since 2008 through our founding craftsman, Dale Kessler. We’re not a franchise and we don’t run call centers. A live person answers our phone 24 hours a day, seven days a week. The technician who shows up is background-checked and uniformed, and treats your home the way he’d treat his own mother’s.

Every job carries the Done Right Promise: if it’s not done right, we make it right, no paperwork and no arguing. That promise rides on The Keystone Standard, which means both manufacturer warranty layers are registered in writing, with durations stated clearly, before the truck leaves your driveway. And because we install authorized lines from PGT, CGI, CWS, and ES Windows as well, if a Mr-Glass unit is beyond saving, we can quote you side-by-side on paper so you understand every alternative before you spend a nickel.

Measure it right the first time, and the rest of the job takes care of itself. That’s the rule Dale keeps on the whiteboard, and it’s the reason Coral Springs homeowners who’ve lived here for twenty years don’t hesitate to call us when a Mr-Glass window starts misbehaving.

FAQs