Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Custom & Geometric Windows in Coral Springs: What to Know First
Mr-Glass custom and geometric windows in Coral Springs typically cost between $850 and $3,200 per opening depending on glass type, frame finish, and whether the unit is impact-rated. We’re an independent Mr-Glass service provider, not a manufacturer dealer, so we quote the work plainly and stand behind it with our own Done Right Promise. Most custom geometric jobs take 3 to 5 weeks from measure to install, and we handle everything from arched transoms to oversized trapezoids.
This page is for Coral Springs homeowners who own a Mr-Glass window or door and need it repaired, replaced, or matched with a custom geometric unit. If that’s you, call (727) 261-2215 and a live person answers, day or night. We’ll tell you what we can do and what it costs before any work begins.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass builds a decent frame, but the custom and geometric lines have failure points we see repeatedly across Coral Springs. Here’s what actually happens and what we do about it.
- Radius stress cracks on Mr-Glass Architectural Series arched units. Curved glass under even slight frame pressure from settling will crack at the apex. In Coral Springs, summer heat expands aluminum frames against the glass edge, and the crack follows within a season or two. We replace the insulated unit and reset the frame with proper expansion clearance, which stops the repeat failure.
- Corner seal fogging on Mr-Glass Geometric Series trapezoids and pentagons. Multi-sided units have more edge seal per square foot than rectangles, which means more sealant to fail. When the desiccant saturates, you get haze between the panes. We measure the opening and order a new insulated glass unit to spec, then set it square and true. No silicone squeeze-over that fails again in a year.
- Roller and track wear on Mr-Glass Custom Sliding Geometries. Oversized triangular or angled sliders put uneven load on the bottom rollers. After ten or twelve years, the door drags or drops. We replace the rollers with OEM where available, or a heavier aftermarket set rated for the panel weight, and realign the track so the panel carries evenly.
- Frame racking on Mr-Glass impact-rated geometric windows. Impact units are heavy, and an out-of-square rough opening torques the frame over time. The window gets hard to lock, or the laminate glass shows stress at the corners. We shim and anchor the frame level, then verify the reveal is consistent before resetting the sash.
- Failed thermal breaks on Mr-Glass Contemporary Series narrow-frame units. Coral Springs humidity works on the polyamide strip between inner and outer frame. Once it degrades, the frame sweats and the seal follows. We re-glaze or replace the unit and confirm the new frame carries a documented thermal break warranty before we leave.
Our Mr-Glass Custom & Geometric Windows Process
Measure it right the first time, and the rest of the job takes care of itself. That’s how we run every Mr-Glass job in Coral Springs.
- 1
Call and describe the window. You reach a live person at (727) 261-2215. We ask about the shape, size, and what’s wrong. We schedule a visit that fits your day, not a four-hour window.
- 2
We measure the opening twice. Our tech checks the rough opening, the existing frame, and the glass dimensions. Twice, every time. If the opening is out of square, we note it before quoting so there are no surprises later.
- 3
We quote on paper, side by side. You get a written line-item price for OEM Mr-Glass parts where available and a quality aftermarket option where it makes sense. You choose. We don’t push.
- 4
We order and build the unit correctly. Custom geometric glass takes days, not hours, because it’s fabricated to your exact measurements. We track the order and call you when it arrives.
- 5
We install, test, and document. The new window goes in level and square. We operate it, check the seals, and photograph the finished work. Your warranty is registered in writing before the truck leaves your driveway.
- 6
The Done Right Promise applies. If something isn’t right, we come back and fix it. No paperwork fight, no argument.
What Mr-Glass Custom & Geometric Windows Costs in Coral Springs
Here’s honest pricing for the Mr-Glass work we do most in Coral Springs.
- Glass-only replacement on a standard Mr-Glass fixed geometric unit: $450-$900 installed, depending on size and laminate.
- Full frame replacement for an arched or radius Mr-Glass window: $1,200-$2,600 installed.
- Impact-rated custom geometric unit, full replacement: $2,200-$3,200 installed.
- Roller and track rebuild on a Mr-Glass sliding geometric door: $280-$600 including parts and labor.
- Full reseal and re-glaze on a Mr-Glass trapezoid or pentagon: $350-$750 depending on unit size and seal condition.
What moves the price is glass type (laminated impact vs standard insulated), frame material, unit size, and whether the rough opening needs correction. We quote fixed prices up front, no change orders unless you change the scope. Call (727) 261-2215 for a free estimate on your specific window.
Why Coral Springs Homeowners Call TruePane Windows & Doors for Mr-Glass Work
We’ve served Coral Springs and the surrounding communities since 2008, and we’re not going anywhere. Dale Kessler grew up in the Ramblewood neighborhood of Coral Springs, where his father spent weekends resealing jalousie windows against summer storms, and that lesson stuck: a bad seal costs you more than a good one ever would.
When you call us about a Mr-Glass window, you get a background-checked, uniformed tech who knows the product, quotes what it costs, and does the work the same day when the parts are on the truck. We don’t just service Mr-Glass. We also work on PGT, CGI, CWS, and ES Windows lines, so if your Coral Springs home has mixed brands, we handle the whole job. Every install carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before we leave.
FAQs
No. We’re an independent Mr-Glass service provider in Coral Springs. That means we can source parts and glass from multiple suppliers, not just one manufacturer, and we’re not bound by dealer pricing or dealer timelines.
Yes. We template the opening, order the insulated glass unit to the precise angles and radius, and set it level and square. Call (727) 261-2215 and we’ll measure it.
Most custom geometric units are ready in 3 to 5 weeks from measurement. Standard-size replacements often go faster. We’ll give you a firm date when we quote, and we’ll be there when we say.
We register every warranty layer in writing before the truck leaves your driveway. If the manufacturer covers the glass and our workmanship covers the install, you’ll have both durations in hand.
Not unless you change the scope. We measure twice, quote fixed, and honor it. The Done Right Promise is our guarantee that if something isn’t right, we make it right without a paperwork fight.
Contact TruePane Windows & Doors
If you have a Mr-Glass custom or geometric window in Coral Springs that needs attention, call (727) 261-2215. You’ll reach a live person who can schedule a free estimate, answer questions about your window, and give you an honest price before any work is scheduled. We stand behind it, in writing.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Springs and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.