Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Window Replacement: The Coral Springs Owner’s Guide
We stock and install Therma-Tru-compatible window replacements throughout Coral Springs, with most swaps running $380 to $920 installed depending on the series, glass package, and whether the frame needs rework. A failed sash, broken seal, or warped frame on a Therma-Tru window is almost always repairable without replacing the entire unit, and we carry the common replacement components on the truck. You’ll usually find the problem after a heavy summer storm, when a window that never leaked before starts weeping at the sill, or when a sash that once slid smooth starts binding in the track around July. In Coral Springs, where humidity runs high nine months of the year and afternoon thunderstorms hit hard, a Therma-Tru window with a compromised seal or worn balance starts showing its age fast. The good news is that most failures announce themselves early, and catching them before water gets into the wall cavity saves a lot of money.
Which Therma-Tru Models This Applies To
Therma-Tru builds entry doors primarily, but their window and sidelite lines share the same hardware, weatherstripping, and glass specifications, so the replacement conversation usually starts with one question: what does the sticker say. Look for a small white or silver label on the hinge side of the sash or along the top of the frame. It will have a series code like the Benchmark, Pulse, or Classic-Craft line, plus a manufacture date that tells us whether the unit falls under the older weatherstripping profile or the newer, tighter compression seal. If the label is gone, we measure the sash thickness, the glass pack depth, and the cam-lock spacing, and we can usually match it from those three numbers.
Therma-Tru windows and sidelites are not universal fit. A Benchmark sash from 2012 will not drop into a Pulse frame from 2019 without an adapter, and the cam locks changed geometry at least twice since 2015. We carry OEM Therma-Tru replacement parts for the common failures, and for sealed glass units we work with a local fabricator in Broward that cuts insulated glass packs to the tenth of an inch. The aftermarket option is honest when the part is a balance or a latch, but when it is a sealed unit, OEM or equivalent spec glass is the only choice that keeps the argon fill and the low-E coating working. Dale Kessler grew up in the Ramblewood neighborhood of Coral Springs, and the rule he kept from his father’s jalousie window repairs is simple: a bad seal costs you more than a good one ever would. Measure it right the first time, and the rest of the job takes care of itself.
Signs Your Therma-Tru Window Replacement Is Failing
- Condensation between the glass panes. The seal has failed, the argon or krypton fill has leaked out, and the low-E coating is now exposed to humid Coral Springs air. This does not get better on its own, and the window loses most of its insulating value.
- The sash binds or sticks when you open it. Therma-Tru balance systems wear unevenly in this climate, especially on the west-facing side of the house where afternoon sun beats on the frame. The shoe or the spiral balance is usually the culprit, and both are replaceable without pulling the entire window.
- You feel a draft even when the window is closed and locked. The compression weatherstripping on older Therma-Tru units flattens over time and stops sealing. Replacing the weatherstripping is a straightforward job, but only if the replacement profile matches the frame year.
- Water stains on the interior sill or drywall below the window. This is the warning sign that the frame has shifted or the sill pan was never flashed correctly. In Coral Springs, where wind-driven rain is routine, a leaking window can rot the rough opening within two seasons if you ignore it.
- The cam locks no longer engage or the sash will not stay up. The hardware on Therma-Tru windows is durable but not indestructible. A broken cam or worn shoe is a small part, but it makes the window feel permanently broken.
Replacement Cost & What’s Included
A Therma-Tru window replacement in Coral Springs typically runs $380 to $920 installed, and the range depends on three things: whether we are replacing a part or the entire sash, whether the glass pack is a standard size or a custom cut, and whether the frame needs to be shimmed and re-anchored. A simple balance replacement or weatherstripping job lands on the low end. A full sash with a custom insulated glass unit and new hardware lands on the high end. We quote the parts and the labor separately on paper, and we do not write a change order halfway through unless the wall itself has failed and we need to stop and talk to you first.
Every job follows The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, and the Done Right Promise on top of it. If the pane is not true, the job is not done. That is the rule Dale Kessler keeps on the whiteboard, and it governs every install we do. We are an independent service provider and are not affiliated with Therma-Tru, but we have been installing and repairing their windows and doors across Broward County for years, and we know which parts fail and why in this climate.
DIY or Call Us?
Some things you can check yourself without risk: whether the sash is square in the frame, whether the cam locks engage, whether the weatherstripping is crushed or torn. Those observations help us quote accurately over the phone. What you should not do is pull a sealed unit or force a stuck sash, because a broken seal or a bent frame rail turns a $200 part into a $900 window. Glass edges are sharp, tempered or not, and a sash that lets go while you are working on it will take fingers with it. Therma-Tru window hardware is built to be serviced, but the person doing the servicing should have the right parts and the right glazing tape in hand. Call (727) 261-2215 and tell us what you are seeing. We will tell you honestly whether it is worth a service call or whether you can live with it for another season.
FAQs
Most Therma-Tru windows in this climate last 15 to 25 years, but the sealed glass units and weatherstripping typically need attention at the 10 to 12 year mark because of the humidity and intense sun exposure. A window that is maintained can outlast the frame it sits in, but a window ignored will fail early on the west and south sides of the house. Call (727) 261-2215 for an exact assessment and a free estimate.
Almost always, and that is the first thing we look for. Balances, cam locks, weatherstripping, and even sealed glass units are replaceable without pulling the entire frame, and we stock the common Therma-Tru replacement parts on the truck. Replacement is the right call when the frame has rotted or shifted, and not before. Call (727) 261-2215 and we will tell you which path makes sense for your window.
Most parts replacements and sash swaps take one to two hours on site, and many are completed in a single visit because we carry the common Therma-Tru components on the truck. A custom insulated glass unit adds a few days for fabrication, and we schedule the install for when the glass is ready. Either way, you will know the timeline before we start.
We carry common Therma-Tru balances, cam locks, weatherstripping, and hardware on the truck, and we source OEM parts or equivalent-spec glass from local fabricators for everything else. We also stock replacement parts for PGT, CGI, and CWS windows when that is what the job calls for. Call (727) 261-2215 and we will confirm the part before we arrive.
If your Therma-Tru window is fogged, sticking, or leaking, call (727) 261-2215 for a free estimate. A live person answers the phone, and we will talk you through what we see and what it costs before anyone gets in the truck.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Springs and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After