Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSliding Glass & Patio Doors in Coral Springs, FL | TruePane Windows & Doors
Sliding glass and patio doors open a home to the lanai, pool deck, or backyard in a way hinged doors simply can’t. In Coral Springs, FL, those doors also have to hold a roofline together in a storm. TruePane Windows & Doors installs impact-rated sliding glass and patio door systems built to Florida’s High-Velocity Hurricane Zone code, using laminated glass panels on a reinforced track and design pressures matched to your specific wind zone. We install across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. Call (727) 261-2215 to talk through your opening size and start a quote.
Product Overview - Sliding Glass & Patio Doors
Sliding glass and patio doors are the architectural workhorse of Florida living. They bring in daylight, extend sightlines, and make a covered patio feel like part of the house. But in Coral Springs, where hurricane season runs from June through November and building departments enforce HVHZ code, a sliding door is also a structural component. The wrong door in the wrong opening is the first thing to fail under wind pressure.
Our impact sliding glass and patio door systems are engineered as large-span assemblies: laminated glass panels riding on a reinforced track, tested to the same wind-zone design pressure as our window lines. That means the glass, frame, rollers, and track work as one load path, not a set of parts that happen to fit together. Available frame materials are aluminum and vinyl. Track configurations include 2-track and 3-track layouts up to 12 feet wide. For a Coral Springs homeowner replacing a dated slider, or a builder running a new construction opening along a pool deck, this is the profile that balances clear glass with code compliance.
TruePane Windows & Doors has installed sliding glass and patio doors throughout Coral Springs for years. We know how these openings behave after a storm, and we know how they behave when they’re installed wrong. Details matter here. Call (727) 261-2215 to speak with our team about your span, your wind zone, and your finish options.
Technical Specifications
- Frame materials: Aluminum or vinyl, selected by exposure, span, and aesthetic
- Maximum size: Up to 12 feet wide, depending on panel configuration and design pressure
- Track configurations: 2-track and 3-track layouts, including open-corner and pocketed options where framing allows
- Glass options: Laminated impact glass with PVB interlayer, low-E insulated glass, tinted glass, clear glass
- Finish options: White, Almond, Bronze, Black, Tan
- Screen options: Retractable screen, sliding screen
- Design pressure: Matched to your wind zone, up to +/-100, never higher
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, engineered to FBC HVHZ requirements
- Installation practice: AAMA 2400/2410 standard compliance, AAMA 812 low-expansion foam perimeter sealant
Hurricane & Compliance Performance
Laminated Impact Glass
The glass in these doors is laminated with a PVB (polyvinyl butyral) interlayer. When debris hits, the glass may crack but it holds in the frame. That’s the difference between a broken window and a breached opening. The interlayer keeps wind and rain outside during the storm, which is exactly what HVHZ code demands of an impact-rated sliding glass and patio door in Coral Springs.
Miami-Dade NOA / Florida Product Approval
Each configuration carries Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers. These are issued per configuration, not per brand, so the exact door in your quote gets its own approval reference. That reference is what your building department in Coral Springs asks for during permitting. We verify it on your specific quote.
FBC / HVHZ Compliance
These sliding glass and patio doors are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. HVHZ is the stricter standard that applies to Broward County and Miami-Dade County. A door that’s only rated for inland wind zones does not meet Coral Springs code. This one does when configured correctly.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. That means the door is struck, then cycled under pressure, then checked against entry attempts. This is the testing context our impact sliding and patio doors are evaluated under.
Design Pressure for Your Wind Zone
Design pressure is matched to your wind zone, up to +/-100, never higher. What that means in practice: a Coral Springs home near the Sawgrass Expressway corridor may need a different DP rating than a home further inland. We specify the door to the location, not the other way around. Overbuilding past the requirement just wastes money.
Energy Performance
Low-E and insulated glass options are available for energy performance, without compromising the impact rating. Low-E coatings cut heat gain through south and west-facing sliders, which is valuable in Coral Springs where afternoon sun hits patio doors hard from March through October.
Color & Glass Options
The finish choices on our sliding glass and patio doors are White, Almond, Bronze, Black, and Tan. In Coral Springs, we see a mix of Florida Mediterranean exteriors and modern coastal builds. Bronze and Black frames give a sharp contrast on white or light stucco walls and have become popular on newer homes around Heron Bay and the Corporate Park area. Almond and Tan read warmer and blend well with earth-tone exteriors. White remains the default choice for traditional Florida ranch homes.
Glass selection depends on what the opening faces. Clear laminated impact glass preserves the truest daylight and works well on shaded or east-facing patios. Tinted glass reduces glare and heat gain on west-facing sliders. Low-E insulated laminated glass adds a thermal break for the hottest months while keeping the impact rating. Our team helps you choose based on the door’s orientation, not just appearance. Call (727) 261-2215 to see finish and glass samples in person.
Installation by TruePane Windows & Doors in Coral Springs
An impact-rated sliding glass door is only as good as the opening it’s set in. The NOA and Florida Product Approval numbers on these sliding glass and patio doors assume a correct installation. A door that’s out of level, out of plumb, or missing the perimeter seal won’t perform to its design pressure, no matter what the sticker says. This is the single biggest reason we do not sell these doors without installation.
Our process starts with a pre-install inspection of the rough opening. We check the header, the subfloor or slab, and the existing waterproofing before we order a single panel. In Coral Springs, many original sliders from the 1990s and 2000s were set without a proper sill pan or perimeter seal, and we often find water damage the homeowner never noticed. We’d rather find it before the new door goes in.
Installation follows AAMA 2400/2410 standard practice. The frame is set level, plumb, and square, with shims only where needed and fasteners spaced per the product approval. We use AAMA 812 low-expansion foam as the perimeter sealant. That foam matters: it seals the gap between frame and rough opening without bowing the frame, which a high-expansion foam will do, and that bowing is what ruins an otherwise good door. After install we run a water test around the perimeter, check panel movement, and clean the glass and track before leaving.
Permitting is part of the job. Coral Springs is in Broward County’s HVHZ jurisdiction, which means your building department will want the NOA or FL Product Approval submittal with the permit application. We handle that documentation and can pull permits where the scope calls for it.
If you’re in Coral Springs and need a sliding glass or patio door measured, replaced, or installed in new construction, call (727) 261-2215. A proper installation is the only way the wind-zone rating means anything.
Frequently Asked Questions - Sliding Glass & Patio Doors
Design pressures are matched to your wind zone, up to +/-100, never higher. Your specific door gets its DP rating based on its size, configuration, and where it sits on the structure. We’ll determine the correct rating for your Coral Springs home during the quote and specify the door accordingly. Call (727) 261-2215 for an exact configuration review, estimates are free.
Lead time varies by manufacturer and configuration. Standard sliding glass and patio door setups from our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines typically run several weeks from approved drawings. Custom sizes, unusual finishes, or a specific NOA submittal can extend that. We’ll confirm a delivery window before you commit. Call (727) 261-2215 to check lead times on your configuration.
Yes. In Coral Springs, which is part of Broward County’s HVHZ jurisdiction, the building department will ask for the NOA or Florida Product Approval reference specific to your door configuration during permit review. We verify the approval numbers on your specific quote and include the documentation with your permit submittal. Call (727) 261-2215 if you need help identifying the right approval for an existing opening.
Yes. These sliding glass and patio doors can be configured as 2-track or 3-track layouts up to 12 feet wide, with several glass and finish combinations. Each configuration carries its own approval reference, so the customization has to stay within what the NOA or FL Product Approval allows. We’ll guide you through which custom options are approved, and which ones aren’t. Call (727) 261-2215 to discuss your rough opening dimensions.
Clean the track with a vacuum or brush every few months, especially after a storms season, and keep the weep holes clear so water can drain. Wipe down the frame with mild soap and water, and avoid abrasive pads on painted finishes. If a panel starts to drag, don’t force it, call us for a track and roller inspection. Call (727) 261-2215 if you notice stiffness or a panel out of alignment.
Get a Quote - Sliding Glass & Patio Doors in Coral Springs
Ready to replace your slider or plan a new patio opening in Coral Springs? Call TruePane Windows & Doors at (727) 261-2215 to schedule a free on-site measurement. We’ll review your wind zone, wall condition, and opening size, then spec your door with the right NOA and a written quote.
Written by the team at TruePane Windows & Doors, serving Coral Springs, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
