Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Parkland, FL | TruePane Windows & Doors
TruePane Windows & Doors provides independent CGI windows and doors service throughout Parkland, FL. We’re not a factory branch and we’re not manufacturer-affiliated, which changes how we work: we diagnose what’s actually failing on your CGI units and repair what can be repaired, rather than defaulting to a full replacement. If you own a CGI Estate Collection window with a fogged seal or a Targa slider that binds in the corner, call (727) 261-2215 and we’ll walk the job with you before quoting it.
Our technicians have spent years working on CGI products across Broward County’s High Velocity Hurricane Zone, and we know the brand’s hardware, seal design, and the installation quirks that show up twenty years after the original install. Parkland‘s housing stock puts us in front of CGI units daily, from Heron Bay to Parkland Golf & Country Club, and we carry the service knowledge that comes from fixing them in this specific climate, under these specific wind-load codes, inside HOA-governed communities that don’t allow just any fix.
Why Parkland Residents Choose Us for CGI Service
Dale Kessler, our owner, grew up in the Ramblewood neighborhood of Coral Springs watching his father reseal jalousie windows against summer storms off the Everglades. That’s where he learned a bad seal costs you more than a good one ever would. He completed his glazing and fenestration coursework at Broward College, then spent the better part of two decades measuring, setting, and trimming impact windows and exterior doors across Broward County before opening TruePane in 2008. When we quote a CGI repair in Parkland, Dale reads the rough opening before the quote, which is why our customers rarely see a change order after the job starts.
Parkland homeowners call us because we know CGI products specifically. The Estate Collection, the Sentinel Series, the Targa line – we’ve opened them, repaired them, replaced hardware on them, and matched glass packs on them. We stock OEM CGI hardware and glass packs when lead times allow, and we carry quality aftermarket rollers, balances, and weatherseals for faster turnaround on aging units. A live person answers our phone 24 hours a day, seven days a week. When you call about a CGI window that fogged or a slider that won’t track, you talk to someone who knows what you’re describing.
Common CGI Windows & Doors Problems We Solve in Parkland
- Fogging between panes from failed IGU seals. Parkland’s daily humidity swings and intense UV exposure put constant stress on insulated glass units in large fixed picture windows. We see it most often on CGI Estate Collection picture windows on second stories, where the seal fails after 15 to 20 years and the glass goes cloudy. When the frame is sound, we replace the sealed unit, not the whole window.
- Warped or binding vinyl frame corners on oversized sliders. Constant HVHZ wind loads and thermal cycling stress the fusion-welded joints on big CGI sliders. The corner welds are the failure point, and once they start to move, the panel binds. We replace the affected panel or re-square the frame where the structure allows.
- Deteriorated compression gaskets and weatherstripping on casement and awning sashes. Parkland sits far enough west that summer downpours hit hard and fast. When the gaskets on CGI casement windows go brittle, water intrusion shows up during those storms. We replace gaskets with material rated for the UV and humidity exposure this far south.
- Sticking roller assemblies and alignment drift in multi-panel CGI sliding glass doors. Homes built in Parkland through the 1990s and early 2000s often have slab settlement, which knocks multi-panel sliders out of alignment. CGI Targa sliders show this as a heavy, grinding feel when you try to move a panel. We replace roller assemblies, re-align the track, and tell you honestly if the slab movement means the frame needs more than a hardware fix.
- Original post-Andrew-era fasteners that don’t meet current HVHZ specs. We’ve found non-HVHZ fasteners on original CGI installations from the 1990s across Parkland. The windows may look intact, but the anchoring doesn’t meet what Broward County requires today. That’s a code compliance issue we flag during any service call, and we fix it when you authorize the work.
CGI Service in Parkland: What Local Conditions Mean for Your Equipment
Parkland sits entirely within Broward County’s High Velocity Hurricane Zone. Every replacement window and door, not just new construction, must carry a Miami-Dade Notice of Acceptance or current Florida Product Approval. That’s a stricter bar than most of Florida, and it means what we do here is not the same as what gets done in Coral Springs or Coconut Creek, where the HOA layer may be lighter or absent.
Here’s the part that catches people off guard. In communities like Heron Bay, the HOA architectural review committee must approve frame color, glass tint, and grid pattern before a permit is even pulled. That step alone adds 3 to 6 weeks to a replacement timeline. Contractors used to pulling permits in neighboring cities get stuck on this. We don’t, because we’ve worked inside Heron Bay, Parkland Golf & Country Club, and Parkland Isles enough times to know the approval sequence and which CGI product lines pass review. We coordinate with the HOA from the first site visit, so your CGI windows get approved, permitted, and installed without a surprise delay in the middle.
There’s another Parkland-specific factor at work: the housing stock. Most homes here were built between 1993 and 2008, which means a wave of original post-Andrew-era impact products are now 20 to 30 years old. The seals are failing, the glass is fogging, and the hardware is worn, all at the same time. These units were installed under lighter codes than what governs Parkland today. When we service them, we’re not just replacing a part; we’re bringing the opening up to current HVHZ wind-load requirements wherever the existing frame allows.
CGI Models & Products We Service in Parkland
We service the full scope of CGI residential product lines in Parkland, including the CGI Estate Collection Impact Windows, the CGI Sentinel Series Impact Windows, the CGI Estate Collection Sliding Glass Doors, and the CGI Targa Series impact-rated doors. Our approach is straightforward: we prioritize OEM CGI hardware and glass packs when lead times allow, because frame dimensions and mounting points on these products are proprietary and aftermarket parts don’t always seat correctly. When lead times run long on OEM, we source quality aftermarket rollers, balances, and weatherseals so your home isn’t left waiting. We repair rather than replace whenever the frame is sound and only the sealed unit or hardware failed. Full replacement is the call when frames show warping, rot, or no longer meet current HVHZ wind-load requirements.
For Parkland homeowners specifically, we emphasize three sub-services: hurricane impact windows, wind mitigation and code compliance, and full frame replacement where the original product won’t meet today’s standard. If you’re not sure which category your CGI units fall into, we’ll tell you in plain language after one service call.
CGI Service Pricing in Parkland
CGI service costs in Parkland depend on what failed. A fogged IGU replacement on a standard sized CGI Estate Collection picture window generally runs $380 to $850 per unit, including glass pack, labor, and disposal. Roller assembly replacement on a CGI Targa slider typically lands between $180 and $420 per panel, depending on access and parts. Compression gasket replacement is usually the least expensive fix, while a full frame replacement on an oversized CGI unit in a Heron Bay home runs higher due to HOA submission work and the cost of large-format impact glass. A service call to diagnose the issue runs $89 to $149, which is credited toward repair work we complete. What drives the cost in Parkland: the size of the opening, the HOA approval sequence, whether you need OEM or aftermarket parts, and whether the existing frame meets current wind-load ratings.
Every estimate we write is a line-item quote on paper. You see what you’re buying. Call (727) 261-2215 to schedule a service call and get an exact number for your CGI windows or doors.
Serving Parkland, FL - Our Local Coverage Area
We’re based in the Parkland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Parkland
If only the glass is fogged and the frame is sound, we can replace the sealed unit without replacing the entire window. We replace the IGU with an impact-rated glass pack that carries a current Miami-Dade NOA, which is what Parkland’s HVHZ code requires. Full replacement only becomes necessary when the frame is warped, rotted, or no longer meets wind-load standards. Call (727) 261-2215 and we’ll tell you which applies to your window after we see it.
Parkland’s master-planned communities, including Heron Bay and Parkland Golf & Country Club, write architectural review into their governing documents. The HOA must approve frame color, glass tint, and grid pattern before the city will even process a permit. That step adds 3 to 6 weeks to the project. We handle the HOA submission for you and know which CGI product lines pass review in these communities, so the approval doesn’t become a stall point.
Sometimes yes, and not just for code compliance. Original CGI units from the mid-1990s in Parkland may have been installed under a lighter wind-load standard than what Broward County’s HVHZ enforces now. We inspect the anchoring and the frame condition, and we tell you plainly whether the unit still meets today’s requirement or whether it only looks like it does. If the frame is sound but the anchoring is outdated, we can often remediate without a full replacement. If the frame won’t pass, we’ll quote a full replacement and coordinate the HOA and permit work. Call (727) 261-2215 for an assessment and a written quote.
The corners on CGI sliders are fusion-welded, and those welds take the brunt of thermal cycling and wind pressure. In Parkland’s HVHZ, constant wind loads stress the joints on oversized panels, and over years the corners start to move. You feel it as a bind or a grind when you slide the door. We repair the panel or re-align the frame where possible. Where the slab has settled and thrown the track out of plane, we address the alignment so the door slides properly again.
We prioritize OEM CGI hardware and glass packs whenever lead times allow, because the frame dimensions and mounting points are proprietary. We source quality aftermarket rollers, balances, and weatherseals for faster turnaround on older units. As an independent service provider, we don’t file warranty claims on your behalf, and we’re straight about that upfront. We’ll tell you if a repair touches anything that could affect a remaining manufacturer warranty, and we’ll document everything in writing before work begins.
Service Areas Near Parkland
Our CGI service work in Parkland regularly takes us into neighboring communities. We cover CGI service in Coral Springs, CGI service in Margate, plus Tamarac, Coconut Creek, and North Lauderdale. If you’re in one of those cities and own CGI windows or doors, the same team that works in Heron Bay and Parkland Golf & Country Club can help. We’re also your local source for CGI sales & service across the region, and you can see our full Parkland service area coverage for details on scheduling.
Book Your CGI Service in Parkland Today
If you own CGI windows or doors in Parkland and something isn’t right, call (727) 261-2215. We’ll schedule a service visit, diagnose the issue, and give you a written line-item quote before any work begins. Same-day service is available for urgent repairs when our schedule allows.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Parkland since 2008. Measure it right the first time, and the rest of the job takes care of itself.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.