ES Windows Custom Windows & Doors Nationwide | TruePane Windows & Doors

ES Windows Custom Windows & Doors in Coral Springs: What to Know First

We provide independent ES Windows custom windows and doors service in Coral Springs, with most custom shape windows, storefront glazing, and oversized glass panel jobs quoted within 48 hours and completed in a single visit. We are not the cheapest bid in town, and we will tell you that on the first call. What we are is an independent ES Windows service provider that measures twice, quotes both manufacturer warranty layers in writing, and stands behind the work for 90 days with no fine print.

Call (727) 261-2215

If you own ES Windows products and something is not right, you have found a company that knows the brand, knows the South Florida climate, and answers the phone when you call. Reach us at (727) 261-2215.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid product, but every window line has its weak points. Here is what we see in Coral Springs, season after season:

• ES Windows E-1250 series roller drag on oversized panels. The E-1250 is a workhorse, but on panels wider than 60 inches, the stainless rollers pick up grit from Coral Springs landscaping and start to drag. The panel feels heavy, the track wears, and homeowners assume the frame is shot. Most of the time, it is a roller rebuild with OEM bearings and a track clean, not a replacement. We have saved Coral Springs homeowners thousands by fixing the rollers before the frame takes real damage.
• ES Windows E series perimeter seal compression set. After eight to ten years in Florida humidity, the EPDM weatherstripping on E series frames loses its memory and takes a flat set. The window still locks, but air moves through, and the AC bill climbs in August. The fix is a full perimeter re-seal with the correct durometer material, not a bead of caulk over the old gasket. Big difference in how the window performs.
• Glass seal failure on ES Windows impact units in coastal-adjacent Coral Springs neighborhoods. We see fogged and milky glass on ES Windows impact units, especially on western exposures that take full afternoon sun. The desiccant in the spacer bar saturates over time, and once moisture gets in, no amount of cleaning fixes it. We replace the insulated glass unit with an OEM-spec lite, and we register the glass warranty in writing before we leave the driveway.
• Frame corrosion at the sill on older ES Windows aluminum lines. The original aluminum frames on ES Windows units from the early 2000s can build corrosion at the sill corner where irrigation overspray hits the frame. Once the anodized finish is compromised, the pitting starts. We clean out the corrosion, treat the aluminum, and install a drainage channel if the opening allows it. In the worst cases, we recommend a sill replacement.
• Architectural grille and SDL rattling on custom ES Windows units. Simulated divided lites and grilles look sharp on custom shapes, but the internal clips loosen over time and start to buzz when the door slams or the wind picks up. The fix is re-clipping the grilles with the correct fasteners and adding a thin isolation pad. It is a small job that makes a big difference in how the window sounds.

Our ES Windows Custom Windows & Doors Process

1. 1
   You call, we answer. A live person picks up at (727) 261-2215. No phone tree. We ask what you are seeing, what the window or door is doing, and we schedule a visit.
2. 2
   We measure and diagnose. A background-checked, uniformed technician measures every opening twice, reads the rough opening before quoting anything, and tells you exactly what is failing and what is just old but still working.
3. 3
   We quote on paper. You get a written line-item quote with OEM and quality aftermarket options shown side by side. Dale Kessler reads a rough opening before he quotes it, which is why our customers rarely see a change order.
4. 4
   We do the work. Most custom windows and doors jobs are completed in a single visit. We protect the work area, work like it is our own mother’s house, and clean up before we go.
5. 5
   We test, then we warranty. Before we leave, we cycle every panel, check every seal, and confirm the operation is right. Then we register both manufacturer warranty layers in writing, state the durations, and hand you the paperwork.
6. 6
   We follow up. The Done Right Promise covers the workmanship. If it is not done right, we make it right. No arguing.

What ES Windows Custom Windows & Doors Costs in Coral Springs

Honest pricing on ES Windows work in Coral Springs depends on the unit, the failure, and the parts. Here are the ranges we quote most often:

• Roller and track rebuild on a single sliding panel: $180 to $340
• Weatherstripping re-seal on one window or door: $150 to $280
• Insulated glass unit replacement on a standard ES Windows sash: $400 to $850, depending on size and glass type
• Custom shape window reglaze (arch, trapezoid, circle-top): $500 to $1,200
• Architectural grille or SDL re-clip and isolation: $120 to $260 per panel
• Storefront glazing and curtain wall repair: quoted per job, starting around $750

What moves the price is the size of the glass, whether we are using OEM or aftermarket parts, and whether the frame is sound or has corrosion that needs treatment. We give you the number on paper before we start, and the number does not change. Call (727) 261-2215 for a free estimate.

Why Coral Springs Homeowners Call TruePane Windows & Doors for ES Windows Work

TruePane Windows & Doors has served Coral Springs and Broward County since 2008 through the craft tradition of second-generation glazier Dale Kessler, who started the company in 2008 because out-of-true installs and voided warranties were problems worth fixing permanently. We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI, which means if an ES Windows repair turns into a replacement, we can quote comparable lines side by side on paper. We also service other brands, so one call covers whatever is in your house. If the pane is not true, the job is not done. That is the rule that names the company and governs every install we make.

FAQs