VLX 100 Pivot Door

VLX 100 Pivot Door in Coral Springs, FL | TruePane Windows & Doors

The VLX 100 Pivot Door is a heavy-duty aluminum entry door that rotates on a vertical center axis instead of traditional side hinges, which lets it carry massive glass panels up to 60 inches wide and 120 inches tall. We install this door throughout Coral Springs as an authorized ViewLux installation partner, so you get the manufacturer’s product with local, code-informed installation. If you’re planning a modern entryway, a remodel, or new construction anywhere in Coral Springs, call TruePane Windows & Doors at (727) 261-2215 and we’ll walk you through sizes, glass, finishes, and a firm written quote.

Product Overview - VLX 100 Pivot Door

The VLX 100 exists for one reason: to make an entrance feel architectural without sacrificing how a door actually performs in South Florida weather. Instead of hanging from side hinges, the entire slab rotates on a vertical axis set off center. That one engineering choice changes everything about proportion and weight distribution. A hinge door with a 60-inch-wide panel would sag eventually. A pivot door carries that load through the floor and frame system, which is why oversized glass becomes possible.

We see the VLX 100 specified most often in Coral Springs homes where the entryway is the design anchor. Contemporary flat-roof houses, mid-century remodels, and even more traditional Florida homes where the owner wants one striking element at the front elevation. The door reads as floor-to-ceiling glass framed by clean aluminum lines, with sightlines that stay narrow despite the panel size.

The aluminum is thick. Wall thickness measures 0.098 inches, and the profile is 2.56 inches wide. That’s a substantial frame for a residential product, and it’s why the door doesn’t flex or bind when temperatures climb into the mid-90s in July. The powder-coated finish holds up against Coral Springs humidity and direct sun, which we’ll get into further down the page.

What buyers respond to first is the glass. A standard hinged front door gives you maybe 20 to 24 inches of glass width. The VLX 100 gives you up to 60. That changes interior light quality, street presence, and how connected the entry feels to the front of the property. Call (727) 261-2215 if you want to see a working sample or talk through whether this door makes sense for your Coral Springs lot and elevation.

Technical Specifications

Here are the raw numbers for the VLX 100, translated into what they mean for a door in Coral Springs:

• Frame wall thickness: 0.098-inch extruded aluminum. This is a heavy-gauge profile compared to typical residential door framing, which is why the door handles wind load and daily use without warping.
• Profile width: 2.56 inches. Wide enough to house the pivot mechanism, weather seals, and insulated glass while keeping a clean architectural face.
• Maximum panel size: 60 inches wide by 120 inches tall. That’s a true statement door. Smaller sizes are available, and the pivot system works down to more standard entry dimensions.
• Glass types: Clear, Frosted, Obscure, Low-E, Tempered, and Laminated. Impact-rated laminated glass is available for Coral Springs wind-load and code requirements.
• Finishes: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood. Powder-coated or anodized finishes engineered for high-UV coastal climates.
• Performance standards: NFRC-rated thermal break technology, AAMA 2400/2410 installation compliance, AAMA 812 low-expansion foam sealant at every perimeter joint.

Performance Features

Thermal Efficiency
The VLX 100 frame includes a thermal break that separates the interior and exterior aluminum faces. That break interrupts heat transfer, so the frame doesn’t conduct midday sun into your Coral Springs entry. NFRC-rated energy performance means the numbers are independently tested, not marketing claims. Pair it with Low-E glass and the door contributes to a tighter building envelope.

Acoustic Performance
If your Coral Springs home faces a busier street, the VLX 100’s thick glass and sealed frame do real work reducing traffic noise. Laminated glass is the strongest option for sound control, because the interlayer dampens vibration across the pane. We typically recommend laminated glass for Coral Springs homeowners on corner lots or near major thoroughfares.

Airtightness & Weather Seal
The door is designed and installed to resist air infiltration at every perimeter joint. TruePane Windows & Doors uses AAMA 812 low-expansion foam sealant on all perimeter joints during installation in Coral Springs, so the sealant doesn’t pull away as the aluminum expands and contracts through seasonal temperature swings. Airtightness also matters for interior comfort and HVAC load.

Waterproofing
A pivot door has a complex bottom sweep and sill condition because the panel rotates across a wider arc than a hinged door. The VLX 100 addresses this with an engineered sill and drainage path that carries water away from the interior. During our Coral Springs installations, we verify the sill slope and apply the perimeter sealant system before the final water test.

Wind Resistance
Coral Springs sits in a high-velocity wind zone, and entry doors are part of the building envelope that code enforcement checks. The VLX 100 is wind-load rated for local climate requirements, and the impact-resistant laminated glass option gives you a door that meets impact standards without a second layer of protection. We pull local permits on every Coral Springs installation so the door is inspected and documented.

Security & Hardware
The pivot system does more than look architectural. The floor-mounted pivot point bears the panel weight through framing, which makes forced entry harder than a door hung on side hinges and screws. Multi-point locking hardware is standard-spec on the VLX 100, and the heavy aluminum profile resists prying. The lock and pivot components are accessible for service without removing the slab.

Color & Glass Options

Finish selection in Coral Springs usually comes down to two questions: does the home lean modern or traditional, and how much sun does the entry face. Premium Black and Bronze read as contemporary and hold their look on homes with darker window frames or black accent trim. Pure White and Anodized Silver suit the clean coastal-modern and Miami-style homes common in Coral Springs. Champagne sits between warm and metallic, useful when a homeowner wants something less stark than black but more interesting than silver. Teak Wood is a powder-coated wood-look finish that gives the aluminum frame warmth from the curb without any wood maintenance.

On glass, Clear maximizes the view and light flow. Frosted gives you privacy with full daylight. Obscure pushes privacy further with a textured surface. Low-E cuts solar heat gain, which matters on west-facing Coral Springs entries. Tempered is a must for safety glazing in a door this size. Laminated adds impact resistance and sound control, and we recommend it for any Coral Springs project where code or hurricane season is a consideration. The right glass choice depends on your elevation, exposure, and whether the door opens to a covered entry or takes direct sun for half the day.

Installation by TruePane Windows & Doors in Coral Springs

A pivot door only performs as well as the opening it’s set into. That’s the honest truth about this product category. The VLX 100 can be manufactured perfectly, and a poor installation will still leave you with a door that drags on the floor, leaks at the sill, or binds in the frame within a year. Worse, an improper installation typically voids the manufacturer warranty, which means the repair cost lands on you.

We install the VLX 100 in Coral Springs to AAMA 2400/2410 standards, which is the recognized installation standard for aluminum fenestration products. The process starts with a pre-install inspection of the rough opening. In Coral Springs homes, we commonly find existing entryways that are out of square, especially on older construction where the slab has settled. Before the door goes in, we verify dimensions, correct subfloor issues if needed, and make sure the load path for the pivot point is solid.

During installation, we set the frame level, plumb, and square before the slab is hung. The pivot floor mechanism is anchored into the structural opening, not just the finish surface. Once the frame is shimmed and fastened, we fill every perimeter joint with AAMA 812 low-expansion foam sealant. That step is specific and repeatable: the foam is designed for fenestration, so it won’t distort the aluminum frame as it cures or lose its bond through Florida heat cycles. After sealant and trim, we run a water test on the sill and threshold, operate the door through its full swing arc, and verify the lock alignment and sweep contact.

Coral Springs adds its own layer of consideration: high-velocity wind zone requirements, humidity that tests sealant adhesion, and local building codes that require permits and inspections on structural entry replacement. We pull permits on every project, the work gets inspected, and you get a record of compliance. When TruePane Windows & Doors installs your VLX 100, the warranty stays intact because the installation meets the standards the manufacturer requires. Call (727) 261-2215 to schedule a preliminary site check and measurement.

Frequently Asked Questions - VLX 100 Pivot Door

Get a Quote - VLX 100 Pivot Door in Coral Springs

If the VLX 100 sounds like the right door for your Coral Springs entry, the next step is a measurement, not a catalog page. TruePane Windows & Doors provides free on-site measurements and written line-item quotes, with no pressure and no change orders after the number is set. Call (727) 261-2215 today and we’ll schedule a time to visit your Coral Springs home, document the opening, and price the VLX 100 in the exact size, glass, and finish you want.

Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Coral Springs, FL.