Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Door Installation for Coral Springs Homeowners
A door that binds, sags, or lets daylight through the weatherstripping is not just an annoyance; it is a sign the opening was never set true. Door installation in Coral Springs runs anywhere from $400 for a straightforward slab swap to $6,000 or more for a custom pivot or impact-rated entry system, and the difference between a door that works for thirty years and one that fights you every July comes down to how the rough opening was prepped and shimmed. TruePane Windows & Doors has been setting doors in South Florida homes since 2008, founded by second-generation glazier Dale Kessler in 2008 on a rule that still names the company: if the pane is not true, the job is not done. If your door is sticking, leaking, or simply looks tired, call (727) 261-2215 and talk to a live person who can tell you straight whether you need a repair or a replacement.
What Our Door Installation Service Includes
Every door we install starts with the same discipline: the opening gets measured twice, the slab gets checked for warp before it ever leaves the truck, and the finished unit gets set so the reveal is even all the way around. Here is what that looks like for each type of door we put in.
Entry & Swing Doors
An entry & swing door is the first thing you touch when you come home and the first thing a guest sees from the street, so it has to do two jobs: look right and seal tight. We install fiberglass, steel, and wood entry doors in Coral Springs, and we set every one with a sill pan and backer rod so the threshold does not rot out from the afternoon thunderstorms we get from June to October. If your current door scrapes the floor or you can see light around the jamb, the opening was never set true, and we will correct it before the new slab goes in.
Double & French Doors
Double doors fail in pairs: if one leaf sags, the astragal grabs, the lock throws wrong, and water finds the gap where the two doors meet. We can walk you through both inswing and outswing double & French door systems, and our technicians rebuild the center mullion before hanging the active and passive leaves so the doors meet flush and the hardware engages without forcing. This is one of the most common callbacks we correct from other installs in Coral Springs, where humidity swells wood and a door that fit in January binds by August.
Bifold & Folding Doors
Bifold & folding doors and multi-panel systems give you a wide opening to a lanai or pool deck, but they ride on a track system that has to be dead level and anchored to carry the weight of four, six, or eight panels. We install folding door systems up to twenty feet wide, and we set the tracks with a laser level and check the panel hang with a straightedge before the final hardware goes in. When a folding door starts to jump the track or the panels drag at the hinge point, it is almost always because the track was run over an unlevel floor slab, and we fix that before the new unit goes up.
Pivot Doors
Pivot doors are the heaviest single-panel doors we install; the pivot hinge carries the full weight of the panel, and the geometry has to be right or the door swings on its own and eats the frame. We hang pivot doors that weigh 200 pounds or more, and we do it with a full-height alignment check so the panel swings true from top to bottom. This is not a door you want a handyman to hang, because a pivot door that is out of true can shift enough to crack the glass insert or split the jamb.
Storm Doors
A storm door in Coral Springs takes the brunt of the afternoon sun and the summer rain, and a cheaply set one will rattle in the wind and let bugs in around the sweep. We install storm doors with full-frame mounting and a bottom expander set to the actual threshold height, not a guess, so the sweep seals without dragging. If you want cross-breeze in the dry months and a solid seal the rest of the year, this is the door that pays for itself.
Arched & Custom Doors
Arched openings are common in a lot of Coral Springs homes built in the 1980s and 1990s, and off-the-shelf rectangular doors do not fit them without an ugly filler panel. We order arched & custom doors built to the actual rough opening, and we template every curve on site so the finished door matches the drywall line within an eighth of an inch. Custom doors are the ones we get called out to replace most often, because a door built to a bad template will never sit right no matter how many times it gets shimmed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Door Installation
We install and service doors from Jeld-Wen, Simonton, and PGT, among others, and we do not play favorites with your money. We are an authorized installer for those lines, which means the manufacturer recognizes our installs and honors the warranty without a fight about who did the work. When a homeowner in Coral Springs has a Jeld-Wen entry door that is sticking, we know the hinge prep and threshold details on that product line well enough to tell you in the first five minutes whether it is a warranty issue or an install issue.
PGT doors are common in Coral Springs because they are built for Florida wind codes, and we set a lot of PGT impact-rated entry and patio doors in this market. Simonton is more often a window line, but we do their patio door units as well, and we know their roller and lock hardware well enough to keep parts on the truck. Whether you have one of those brands or any other make, we will quote you side by side on paper so you see exactly what you are buying before you sign anything.
Signs You Need Door Installation Right Now
- The door scrapes the floor or the top jamb. A door that drags means either the hinges are failing or the rough opening was not square when the door was set. In Coral Springs humidity, wood slabs swell and the problem only gets worse, so a door that scrapes in winter will bind hard by summer.
- You can see daylight around the weatherstripping. That gap is not just an energy leak; it is an entry point for rain, bugs, and noise. If the gap is wide enough to see, the door is out of plane and no amount of new weatherstrip will fix it.
- The lock or deadbolt does not throw smoothly. When a deadbolt fights you, the door and the strike plate are out of alignment. That usually means the door has settled or the hinges are worn, and forcing the lock every day is a security risk you do not have to live with.
- The door panel is cracked, rotted, or delaminating. In South Florida, a cracked wood or composite door will wick in moisture and come apart around the frame within a couple of seasons. Replacing the slab before the jamb rots is a cheaper fix than rebuilding the opening.
- Water stains appear on the floor inside the threshold. That stain means water is getting past the door and pooling at the sill. It is almost always an install issue, not a slab issue, and the fix is pulling the door and setting a proper sill pan, not caulking over the gap.
Our Door Installation Process - Step by Step
- 1
Measure and quote on paper. We measure the rough opening twice, check for out-of-square and out-of-plumb with a level and straightedge, and quote the work in writing with the manufacturer line, the model, and the warranty durations stated. You will not get a verbal number and a surprise later.
- 2
Remove the old door and inspect the rough opening. The old slab comes out and the jamb comes off, and that is when we see what the last installer did. We check the header for sag, the subfloor for rot, and the framing for square before any new material goes in.
- 3
Prep the opening and set the pan. We install a sill pan that turns water back out toward the exterior, and we shim the jamb with flat shims, not the door casing, so the frame stays in plane when the wind loads hit during storm season.
- 4
Hang the slab and set the reveal. The door goes in with an even gap on all four sides, the hardware gets mounted to the thickness of the slab, and the sweep gets set to the actual threshold height. We check the swing, the lock throw, and the seal before the fasteners are final.
- 5
Register the warranties and walk the job with you. Both manufacturer warranty layers get registered in writing before the truck leaves the driveway, and we walk the finished door with you and show you what was done. That is The Keystone Standard, and it is not optional on any TruePane job.
How Much Does Door Installation Cost in Coral Springs?
A straight slab swap on a standard entry door in Coral Springs typically runs $400 to $900 for a basic steel or fiberglass unit, installed. A mid-range fiberglass entry door with a full-frame replacement and new hardware lands between $1,200 and $2,500. Double or French door installations run $1,800 to $4,000 depending on the material, the glass package, and whether you need impact rating. A custom pivot door or a full folding door wall can run $5,000 to $15,000, and that number is driven almost entirely by the hardware and the engineering of the opening. Those are real numbers for this market, set against the homes and the wind codes we work with here, not national averages that do not apply.
What moves the price: the condition of the rough opening, the material of the slab, the hardware finish and lock set, any impact rating or laminated glass, and whether we need to correct the framing from a previous install. The way to avoid overpaying is to get a written, line-item quote that separates the door cost from the labor and the trim, and to ask up front who registers the warranty. We register both manufacturer warranty layers in writing on every job. A free estimate from TruePane includes the door measured, the opening checked, and the price on paper with no obligation.
Door Installation Near Coral Springs - Our Service Area
We set doors all over northern Broward County, from Coral Springs out to Margate, Parkland, Tamarac, Coconut Creek, North Lauderdale, Sunrise, Lauderhill, Lauderdale Lakes, Pompano Beach, Deerfield Beach, and Oakland Park. Most door installations in this area are scheduled within the same week, and a live person answers the phone 24 hours a day if you need to talk through what you are seeing before you commit to anything. Door Installation in Margate and Door Installation in Parkland are the same crews, the same standards, and the same written quote.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Door Installation in Coral Springs
Door installation means removing the existing door slab or full frame, prepping the rough opening, and setting a new door unit so it hangs square, seals tight, and locks true. It includes the threshold, the weatherstripping, the hardware, and the trim, and it is finished when the warranty is registered and the door swings right. A full-frame install also includes the jamb and the sill pan, which is the difference between a door that lasts and one that rots out in five years.
A standard single entry door replacement usually takes one full visit, typically four to six hours from tear-out to final walkthrough. Double doors, folding doors, and any install where we have to correct an out-of-square opening may stretch into a second day. We will give you a straight answer on the timeline in the written estimate, and the crew will not leave a door hanging half-done overnight.
A basic entry door swap runs $400 to $900, a full-frame replacement with a quality fiberglass or steel slab runs $1,200 to $2,500, and impact-rated or custom units go up from there. The only way to get a real number is to have the opening measured and the options quoted on paper. Call (727) 261-2215 and we will put a written estimate in front of you with the door cost, the labor, and the warranty separated out.
Yes. We are an authorized installer for and we have set hundreds of their entry and patio doors in Coral Springs and the surrounding cities. We know their hinge prep, their threshold details, and their warranty paperwork well enough to register both layers in writing on the spot. If you have a Jeld-Wen door that was installed by someone else and it is sticking or leaking, we can tell you whether it is a warranty issue or an install issue before you spend anything.
A door that will not close or lock is a security problem, and we treat it that way. A live person answers the phone 24 hours a day, seven days a week, at (727) 261-2215, and we will get a technician out to secure the opening and set a plan. If a door failed at the frame from a break-in or a storm, we will board it or brace it that day and schedule the full replacement as soon as the opening is safe to work.
Every TruePane door install is covered by our Done Right Promise: if it is not done right, we make it right, with no paperwork fight and no arguing about who is responsible. On top of that, The Keystone Standard means both manufacturer warranty layers are registered in writing, with the durations stated, before the truck leaves your driveway. We stand behind the work because Dale Kessler built this company on the rule that the job is not done until it is true.
Clear the area inside and outside the door, move furniture at least six feet back from the opening, and make sure the crew has a clear path to carry the old door out and the new one in. If you have pets, keep them in a separate room while the door is off the hinges. We will protect the floor with drop cloths and clean up the sawdust and the old hardware before we walk the job with you.
Schedule Your Door Installation Service in Coral Springs Today
A door that works right is the quietest improvement you can make to a home, and the process starts with a phone call, not a form. Call (727) 261-2215 and a live person will answer, get your address in Coral Springs or the surrounding area, and set a time for a free, no-obligation estimate. You will get a written quote, a straight answer on timing, and a door that swings true for decades. If you need a new door, have us look at your windows while we are there, because out-of-true runs in pairs. Call (727) 261-2215 today and we will be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.