Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Wilton Manors
Custom windows and doors in Wilton Manors are not a luxury; they are a structural necessity. The Island City’s canal geography puts salt air and heavy humidity against every opening in your home, and the original jalousies and single-pane sliders in our 1950s and 1960s CBS ranches were never built to hold that load. We see the evidence daily: corroded frames, seized cranks, fogged glass, weatherstripping that crumbles in two wet seasons. TruePane measures every opening twice, quotes the right material for this exact microclimate, and installs it square and sealed. Call (727) 261-2215 for a free estimate on custom windows or doors in Wilton Manors.
Why TruePane Windows & Doors Is Wilton Manors’s Preferred Custom Windows & Doors Company
We have been setting windows and hanging doors in Wilton Manors long enough to know what the canal air does to metal, glass, and seals. Homeowners here tend to stay put. They have watched a bargain aluminum frame pit and bloom with white corrosion inside a decade, and they do not want to pay for the same job twice. That is precisely why we run every Wilton Manors job through The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. No fine print. No chasing a warranty that was never filed.
Our crews know the blocks off NE 26th Street, the canal-side homes along Middle River Drive, and the quiet interior streets near Hagen Park where the old CBS ranches still hold their original openings. We are a second-generation glazier’s company, founded by Dale Kessler, and our installers are background-checked and uniformed. They treat your home the way they would treat their own mother’s house. When a Wilton Manors homeowner calls, a live person answers. Twenty-four hours a day, seven days a week. Not a voicemail tree, not a regional call center.
Dale founded TruePane in 2008 out of a simple frustration: too many windows were installed out of true, and too many warranties were voided on a technicality. Our whiteboard rule has not changed since. If the pane is not true, the job is not done. And our Done Right Promise backs it: if it is not done right, we make it right. No paperwork, no arguing.
We are Wilton Manors neighbors in practice, even though our South Florida dispatch office coordinates scheduling from Miami. Our installers and project leads know this city’s housing stock, its permit desk, and its salt-air failures. That local knowledge is what keeps a custom window or door installation from turning into a callback.
Our Custom Windows & Doors Services in Wilton Manors
Every home in Wilton Manors has its own fingerprint: a block opening that is three-eighths out of square, a jalousie conversion that needs custom frame extension, a sliding door track that has been pitted by salt air since the 1980s. We build and install for the actual opening, not the catalog dimension. Here is what we handle most in this city.
Custom Shape Windows
Wilton Manors has a surprising number of radius-top, circle, trapezoid, and eyebrow windows on its 1950s and 1960s ranch homes and its 1920s-era cottages near the Middle River. These shapes cannot be pulled off a warehouse shelf. We fabricate custom shape windows to fit the original masonry opening exactly, using impact-rated laminated glass and frames that will not bow under Broward County wind loads. The salt-air conversation matters here: we specify stainless steel hardware and marine-grade finishes because a custom shape window is expensive enough to do once.

Oversized Glass Panels
Homes on the canals in Wilton Manors were often built to capture the water view, and that means large fixed glass panels and expansive slider assemblies. Oversized panels in this microclimate fail more dramatically when the seal goes because there is simply more glass surface pulling in humidity. We install oversized impact-rated panels with reinforced mullions and thermal spacers built to hold a seal in persistent damp air. If you are looking at a fogged picture window facing the Middle River, the fix is usually not the glass alone; it is the whole unit, reflashed and resealed against the block wall.

Architectural Grilles & SDLs
Many Wilton Manors homeowners want the look of divided light without sacrificing one piece of impact protection. Simulated divided lites, or SDLs, applied to the interior and exterior faces of an impact-rated unit give you that classic cottage or ranch look while keeping the glass as one solid impact membrane. We match grille profiles to the other windows on the house, whether that is a colonial rectilinear bar or a narrower prairie profile. In Wilton Manors, where so many homes have original character worth keeping, the grille detail is often the difference between a window that looks right and one that looks like an afterthought.

Commercial Storefront Glazing and Curtain Wall Systems
Wilton Drive and the storefronts around Five Points have their own set of problems: old non-impact storefront glass, corroded aluminum mullions, and doors that bind. We handle commercial storefront glazing and curtain wall systems for property owners in Wilton Manors who need code-compliant impact systems or who simply want an older storefront rebuilt with materials that will not pit in the salt air. For a small plaza or a single storefront on Wilton Drive, we quote a square deal: line-item pricing on paper, no change orders unless the opening itself changes.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wilton Manors
We are an authorized installer for more than a dozen manufacturer lines, and for Wilton Manors we tend to specify from a short list that holds up to salt air and humidity: PGT, and Ply Gem among others. PGT’s aluminum and vinyl impact lines are common in this city for good reason; their hardware and frame finishes are built for the Florida coast. Jeld-Wen and Simonton give us solid wood and clad-wood options when a Wilton Manors cottage needs a traditional look. We quote manufacturer lines side by side on paper so you see exactly what you are buying, and we register both warranty layers in writing before the install crew leaves your driveway. That is The Keystone Standard, and it applies to every window and door we set in Wilton Manors.
Common Custom Windows & Doors Problems We See in Wilton Manors Homes
- Salt-air corrosion on aluminum frames and hardware. Homes within a few hundred feet of the Middle River or its feeder canals show white pitting and flaking on aluminum sashes and door thresholds within 10 to 15 years, even on impact units installed in the 2000s. We replace these with fusion-welded vinyl or marine-grade aluminum and stainless hardware, and we specify a finish rated for salt exposure.
- Weatherstripping that fails in two or three seasons. The persistent humidity off the canals breaks down foam and felt seals fast. A door that starts binding in July or a window that whistles during the afternoon storms is almost always weatherstripping degradation. We replace with high-density EPDM and silicone bulb gaskets that hold their shape in damp air.
- Fogged insulating glass units from seal failure. This is the signature canal-island failure. Salt air and humidity attack the perimeter seal, and once desiccant is saturated, the window fogs between the panes. In Wilton Manors, this shows up earlier than a few miles inland in Plantation or Sunrise. A fogged unit is not just cosmetic; the insulating value is gone, and if it is an impact unit, the structural rating may be compromised.
- Original jalousie windows with seized cranks. A large share of the 1950s and 1960s CBS ranches on interior streets near the canals still have their original jalousies. The aluminum sashes seize as salt air corrodes the pivot arms and crank gears. Jalousies are no longer code-permissible for new installation in Florida and offer no hurricane protection, so a permitted remodel or an insurance-driven upgrade triggers a mandatory full-opening replacement to an impact-rated unit.
Pricing for Custom Windows & Doors in Wilton Manors, FL
Custom window and door work in Wilton Manors runs higher than the inland Broward average because salt-air-rated materials and impact glazing are not optional here. A standard custom single-hung impact window for an older CBS ranch runs roughly $900 to $1,700 per opening installed, depending on frame material and size. A custom shape window, say a radius top or a trapezoid, typically runs $1,400 to $2,800. Replacing an original jalousie bay with a full impact casement or fixed unit often lands between $2,200 and $4,500 per opening because the block opening needs custom framing and flashing. An oversized canal-facing picture window, impact-rated and resealed, can run $2,800 to $6,500. These are real ranges from our Wilton Manors jobs, and they include permitting, anchoring into block, and both warranty layers registered in writing. We give free estimates with line-item pricing in writing. Call (727) 261-2215 to schedule one.
We Also Serve Cities Near Wilton Manors
TruePane runs crews into Coral Springs, Margate, Parkland, and Tamarac, so if you have family or investment property just west or north of Wilton Manors, the same Custom Windows & Doors team can handle it. The salt-air conversation matters less in Coral Springs and Parkland, but the code requirements and the standard of work never change.
Serving Wilton Manors, FL - Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Wilton Manors
Wilton Manors is nearly surrounded by the Middle River canal system, and that open water puts salt-laden, high-humidity air against your window frames and door hardware year-round; in Plantation or Sunrise, a few miles inland, the air is measurably less corrosive. Aluminum pitting, weatherstripping rot, and seal failure all arrive faster here, which is why we specify marine-grade finishes, stainless steel hardware, and fusion-welded vinyl or properly anodized aluminum for canal-adjacent homes. Call (727) 261-2215 for an exact recommendation and a written quote.
Yes; Wilton Manors is in Broward County’s High-Velocity Hurricane Zone, and under the Florida Building Code every replacement window and door in new construction and permitted remodels must be impact-rated or protected by code-compliant shutters, no exceptions for older CBS homes. Your concrete block walls will stand through a storm, but the openings are only as strong as the glass and frames in them. We pull permits and pass inspections on every impact conversion we do in Wilton Manors.
Yes; jalousie-to-impact conversion is the single most common permitted window job we handle at the Wilton Manors building desk, and it starts with custom sizing to fit your original block openings so the new impact unit anchors properly into the masonry. We remove the old jalousie frames, prep and flash the opening, and set an impact-rated casement, single-hung, or fixed unit with modern weatherstripping and a real seal. Most jalousie conversions run $2,200 to $4,500 per opening, installed and permitted.
Fog between the panes means the insulated glass unit’s perimeter seal has failed and the unit is no longer doing its job; in Wilton Manors, the canal humidity saturates the desiccant faster than inland, so this failure often appears within 10 to 15 years on units that would last decades elsewhere. A fogged impact unit may also have lost some of its structural rating, so we recommend replacing the whole unit rather than reglazing just the glass. Call (727) 261-2215 and we will come measure and quote it.
We measure every opening twice and build or order windows to those exact rough dimensions, because the concrete block openings in Wilton Manors’s 1950s and 1960s ranches are rarely plumb, square, or sized to any modern catalog. Custom sizing costs more than a stock unit, often 10 to 20 percent more, but it is the difference between a sealed, code-passing install and a window that fights the block wall for thirty years. Our free estimate includes the exact dimensions, the flashing plan, and a written price you can take to the bank.
If you are tired of looking at fogged glass, frames that flake white powder, or cranks that will not turn, call TruePane at (727) 261-2215. We will come to Wilton Manors, measure every opening, and put a square deal in writing. A live person answers the phone. Every time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Wilton Manors since 2008 through a second-generation glazier’s craft tradition.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After