Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Door Installation: The Coral Springs Owner’s Guide
If you have an ES Windows door that needs new hardware, rollers, weatherstripping, or a full reinstallation, we stock ES Windows-compatible door installation parts and complete most door part swaps in a single visit. Installed pricing in Coral Springs typically runs $140 to $390 depending on the part, and a full door removal and reset starts around $475. What usually brings a homeowner to this page is a door that has started dragging on the track, a latch that no longer catches cleanly, or a handle that spins without turning the mechanism.
We are an independent service provider, not affiliated with ES Windows, but we work on their doors regularly across Coral Springs and know which parts interchange and which ones don’t. That distinction matters more than most people expect.
Which ES Windows Models This Applies To
ES Windows has been sold in Florida under a handful of series names over the years, and the hardware is not universal across all of them. The most common lines we see in Coral Springs homes are the ES Impact series, the ES Classic line, and a newer ES thermally improved extrusion that shares some roller hardware with the impact line but uses a different keeper profile on the hinges. The quickest way to identify what you have is to look at the corner of the glass panel or the bottom rail for a laser-etched code, usually a series letter followed by a four-digit number. That code tells us more than the door’s color ever will.
The one compatibility gotcha we run into constantly is roller diameter. Older ES Impact doors in Coral Springs, especially those installed before 2011, used a 1-inch steel roller that ES later replaced with a 1-1/4-inch polymer roller. They are not interchangeable, and forcing the wrong roller into an existing track wears the rail and destroys the replacement in under a year. We carry both sizes on the truck and measure the track before quoting. For hinges and keepers, we prefer genuine ES Windows parts where they’re still available because the screw hole indexing matches the extrusion exactly. For rollers and weatherstripping, there are aftermarket equivalents out of Doral that hold up as well as OEM in Florida humidity for less money, and we’ll quote both side by side on paper so you can see the difference yourself.
Signs Your ES Windows Door Installation Is Failing
- The door drags or catches at the midpoint of the track. This is almost always a flattened roller or debris packed into the bottom rail. In Coral Springs we see sand and salt-laced dirt work its way into the track faster up near the Sawgrass, and a roller on its way out will chew aluminum rail before you notice the grind.
- The latch only engages when you lift the door up or push it hard at the corner. That’s a sag issue, which means the hinge or the roller has worn unevenly. A door that sags is putting load on the lock mechanism that ES Windows hardware was never designed to absorb.
- You can hear metal scraping metal when the door moves. A clean ES Windows door glides quiet. Scraping means a roller has seized or the track has been scored enough that a new roller alone will not fix it. That’s a one-hour observation before we’d recommend patching the rail or replacing it outright.
- Air, water, or light is visible around the door perimeter. Weatherstripping on ES Windows doors compresses over time, especially on western-facing walls that bake in the Coral Springs afternoon. A worn seal is the cheapest part of the door and the one most likely to quietly damage the flooring below it.
- The handle spins freely or requires more than a quarter turn to retract the multi-point lock. That is a gearbox failure in the lock body, not a loose screw. The sooner it’s addressed, the more likely we can swap the gearbox rather than the entire handle assembly.
Replacement Cost & What’s Included
In Coral Springs, here’s what we typically see for ES Windows door installation work:
- Roller replacement (pair): $140 to $210 installed, including track cleaning and adjustment
- Multi-point lock gearbox replacement: $180 to $290 installed
- Weatherstripping full-perimeter replacement: $160 to $280 installed, depending on door size
- Handle and lock replacement (complete set): $190 to $340 installed
- Full door removal, cleaning, and reset: $475 to $650 installed
The price spread depends on which ES Windows series you have and whether we’re replacing with OEM or aftermarket parts. Every quote includes the part, labor, disposal of the old hardware, and a written line-item price before we touch the door. We register both warranty layers in writing, and the workmanship is covered by our Done Right Promise. If it’s not done right, we make it right, no paperwork and no arguing.
DIY or Call Us?
You can safely check a few things on your own: look at the bottom rail and track for visible grit or debris, see if the screws on the hinge are tight, and note whether the door struggles more in the humid months. A lot of Coral Springs homeowners find their ES Windows door behaves worse in August when the frame has swelled, and that’s useful information to share with us.
What we would not recommend doing yourself is pulling the panel off the track or disassembling a multi-point lock. A large glass panel off its track is heavy and awkward, and the gearboxes in ES Windows locks are under spring tension that can fire a small part across the room when opened incorrectly. That’s not scare talk, it’s just the part that sends more people to urgent care than any other. If the door is sagging, grinding, or the handle spins, call us at (727) 261-2215 and we’ll get a measurement and a price locked down before we lift a tool.
FAQs
Expect 7 to 12 years from factory rollers in Coral Springs, leaning shorter for doors that face the beach side of the Sawgrass or sit under a western exposure. The polymer rollers ES Windows uses today outlast the older 1-inch steel rollers, which typically failed in 5 to 8 years because the steel bearing would rust and seize in humidity. Call (727) 261-2215 and we’ll tell you which roller your door is running and what its realistic remaining life looks like.
In many cases, yes. If the multi-point lock still turns but the latch points aren’t engaging, we can often rebuild the gearbox with a replacement module for less than a full handle swap. If the gearbox has stripped or the handle internal splines are worn out, replacement is the more honest fix. We’ll quote both options and tell you which one we’d put in our own home.
Most roller, weatherstripping, and lock component replacements take between 45 minutes and two hours on site. A full door removal and reset is closer to three hours, including re-leveling the panel and re-trimming the seal. We carry common ES Windows-compatible parts on the truck, so most Coral Springs jobs are done in one visit.
We keep the common failure parts in stock: both roller sizes, lock gearboxes for the Impact and Classic series, keepers, hinge kits, and weatherstripping cut to length. Unusual finish colors or entire replacement panels are ordered, and we’ll tell you the lead time before you commit. Along with ES Windows items, we also stock compatible hardware for Andersen, and Pella doors.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Springs and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.