Mr-Glass Door Installation Nationwide | TruePane Windows & Doors

Mr-Glass Door Installation in Coral Springs: What to Know First

Mr-Glass door installation in Coral Springs typically runs $850 to $3,200 depending on the door type, frame condition, and whether you’re replacing a single slab or the entire pre-hung unit. We install and service Mr-Glass entry doors, French doors, and storm doors for homeowners throughout Coral Springs, with most single-door jobs completed in one visit. We’re an independent Mr-Glass service provider, not a manufacturer affiliate, which means we answer to you and the condition of your opening, not a corporate install script.

Call (727) 261-2215

This page is written for the Coral Springs homeowner who owns a Mr-Glass door and wants it installed correctly, or replaced before the next hurricane season tests it. If you’d rather talk than read, call (727) 261-2215 and Dale Kessler or one of our techs will walk you through what you’re dealing with.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass doors are solid mid-range products, but after enough Coral Springs summers they develop predictable problems. Here’s what we see most often:

• Threshold rot on the swing side. The Mr-Glass Colonial and Craftsman series entry doors use an aluminum threshold that’s milled tight, not sealed. Coral Springs gets 60-plus inches of rain a year, and afternoon thunderstorms push water sideways against south-facing doors. We regularly pull these thresholds and find the subfloor plywood gone soft. Our fix is a full threshold replacement with proper sill flashing, not a caulk bead over rot that’s already advanced.
• Thermal bow on dark-colored slabs. The Mr-Glass Hampton fiberglass door in dark stain absorbs direct sun on west-facing Coral Springs elevations and bows enough to bind at the strike plate by late afternoon. The door tests square at 9 a.m. and won’t latch at 4 p.m. We fix this by adjusting hinge mortises or, when the bow is permanent, replacing the slab and setting the reveal on the shade side of the afternoon.
• Fogged glass inserts on French doors. Mr-Glass French door units with decorative glass inserts lose their argon fill after about 8 to 12 years in Florida humidity. The seal fails at the bottom corner first because that’s where condensation pools in a Coral Springs morning. You can’t reseal an insulated glass unit, so we replace the insert with a matching spec and register the new warranty layer instead of pretending it never happened.
• Hardware pull-out on high-traffic levers. The Mr-Glass Avalon entry door ships with a standard mortise lock, but the lever screws are machine-threaded into wood jamb material with no reinforcement. A household that uses that door ten times a day will strip the strike screws in two or three years. We install Grade 1 hardware with through-bolts into the framing, not just longer screws into the same tired wood.
• Storm door closer stress cracks. The Mr-Glass Breeze storm door closer bracket is a lightweight die-cast zinc. In Coral Springs wind gusts, a storm door that catches a gust slams against the closer stop and cracks the bracket behind the piston. We replace those with reinforced closer brackets mounted in a reinforced jamb, because the next thing to go after the bracket is the glass itself.

Our Mr-Glass Door Installation Process

Here’s what a Mr-Glass installation with TruePane Windows & Doors looks like from your first call to the day we lock up and leave:

1. 1
   You call (727) 261-2215. A live person answers. We ask what you’re seeing, what the door does wrong, and whether the problem is new this season or has been creeping up for a while.
2. 2
   We measure, then we quote. Dale reads the rough opening before he prices anything. We measure the jamb depth, the reveal, the hinge positions, and the existing hardware prep, all on paper.
3. 3
   We lay out your options side by side. If we’re replacing the slab or the whole unit, we show you OEM Mr-Glass pricing next to comparable Andersen, PGT, and CGI units in writing, with warranty differences noted. You decide with full information.
4. 4
   We install the door true. Plumb on the hinge side, level on the header, reveal consistent all the way around, weatherstripping seated, threshold sealed and flashed. If the pane is not true, the job is not done.
5. 5
   We test everything in front of you. Open, close, lock, unlock. We run the door through several cycles and have you run it too. If we installed new hardware, we key it and hand you the original packaging.
6. 6
   You get the Keystone Standard before we leave. Both warranty layers registered in writing, durations stated, and your Done Right Promise confirmed on the invoice.

What Mr-Glass Door Installation Costs in Coral Springs

Here are the ranges we typically quote on Mr-Glass work in the Coral Springs market. These are honest midpoints; the exact number depends on your opening, your existing frame, and what you choose to put back:

What moves the price: whether your existing jamb is salvageable, whether you need impact-rated glass to meet Coral Springs code, and whether the rough opening has any hidden water damage from years of Florida rain. We quote a fixed price before the job starts, and you won’t see a change order unless you change the scope yourself. Call (727) 261-2215 for a free estimate on your specific door.

Why Coral Springs Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’ve been doing this work in Coral Springs long enough to know which Mr-Glass products hold up and which ones don’t, and we don’t sugarcoat either one. Our techs are background-checked and uniformed, and they measure every opening twice before the saw comes out. Every Mr-Glass job carries our Done Right Promise. If something isn’t right, we come back and make it right, no paperwork, no arguing, no fine print. And when a Mr-Glass product isn’t the best answer, we’ll tell you, and show you PGT, CGI, CWS, or ES Windows alternatives side by side on paper so you can see the difference for yourself. A square deal means you see exactly what you’re buying before you buy it.

FAQs