Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Custom Windows & Doors in Coral Springs: What to Know First
Simonton custom windows and doors in Coral Springs typically take two to three weeks from measurement to installation, with most custom shape and oversized glass work completed in a single visit once the units arrive. As an independent Simonton service provider, TruePane Windows & Doors installs, replaces, and services these units with upfront pricing and both warranty layers registered in writing before the truck leaves your driveway. If you own a Simonton window or door that’s binding, fogged, or simply needs a custom replacement, call (727) 261-2215 for a free estimate.
This page is written for Coral Springs homeowners who bought Simonton products years ago and want to know what they actually have, what’s worth fixing, and what it should cost. Dale Kessler grew up resealing jalousie windows in Ramblewood with his father, and we still treat every Simonton job the same way: measure it right the first time, and the rest of the job takes care of itself.
How Simonton Products Fail - and How We Fix Them
Simonton builds a solid mid-range window, but after fifteen to twenty years in South Florida heat and humidity, we see the same five issues repeat across Coral Springs neighborhoods from Cypress Run to Heron Bay. Here’s what actually goes wrong:
- Reflections 5500 and 6500 series - fogged insulated glass units. The Reflections line was installed heavily in Coral Springs homes built in the 1990s and early 2000s. The spacer seal around the glass edge breaks down under constant UV and humidity cycling. You don’t need a whole new window; we measure the sash and order a replacement IGU with the same glass package, then reset it square so the seal isn’t stressed from day one.
- Simonton ProFinish and Impressions series - vinyl sash corner weld fatigue. On windows facing full western sun along Wiles Road or Atlantic Boulevard, the vinyl frame corners flex and micro-crack over time. A cracked corner lets air and water in, and eventually the sash won’t close true. We re-weld or replace the sash and re-shim the frame so the panel sits true in the opening.
- Simonton DaylightMax and custom shape units - balance system failure. Those half-round and arch-top windows over entry doors are beautiful until the coil balances inside the jamb lose tension. The sash gets heavy, then drops hard. We replace the balance with the correct weight-rated coil, not a generic one that leaves the window fighting you for the next decade.
- Simonton StormBreaker impact units - rolling-screen and weatherstripping wear. Impact windows in Coral Springs take a beating from salt air and afternoon storms. The tracks fill with grit, the rolling screens bind, and the weather-stripping flattens. This is a maintenance repair, not a replacement; we clean the track, re-tension or replace the rollers, and install fresh wool pile or vinyl bulb weather-stripping that matches the StormBreaker profile.
- Simonton Madeira and Reflections patio doors - sagging rollers and binding tracks. A sliding glass door that binds in July is a Simonton door with either worn rollers or a settled floor. We level the panel, replace the rollers with the correct Simonton-compatible set, and re-set the track. If the slab has settled, we’ll tell you honestly - shims can correct it if the movement has stopped.
Our Simonton Custom Windows & Doors Process
Here’s how a Simonton job runs from the first call to the final walkthrough:
- 1
Call and describe the problem. You talk to a live person, not a voicemail tree. We ask what you’re seeing: fogging, binding, a crack, a draft.
- 2
We measure every opening twice. Before any quote, a background-checked technician measures the rough opening, checks the frame for square, and looks at how the unit sits in the wall. On custom shape work - arches, trapezoids, oversized panels - this is where most contractors get it wrong and blame the manufacturer later.
- 3
We quote on paper, side by side. If you’re replacing, we’ll show you Simonton next to equivalent Andersen, Pella, PGT, or ViewLux lines, with panel dimensions and glass packages itemized. You see exactly what you’re buying before you spend a dollar.
- 4
We decide OEM versus aftermarket parts together. For Simonton-specific hardware - balances, corner keys, weatherstripping - OEM is often the right call for warranty preservation. For glass replacement, a certified local fabricator often supplies an IGU that matches or exceeds the original seal design. We explain the difference and let you choose.
- 5
We install, level, seal, and check. The unit goes in plumb and square. We use closed-cell backer rod and a polyurethane sealant suited to Coral Springs heat, not a tube of latex caulk that shrinks in the first dry season.
- 6
We register the warranty in writing and walk you through the job. The Keystone Standard is our rule: both manufacturer warranty layers registered, durations stated, before we leave. Then you test the window or door yourself while we’re still standing there.
What Simonton Custom Windows & Doors Costs in Coral Springs
Simonton work in Coral Springs runs the range you’d expect for a quality mid-range vinyl line, and we quote it line-by-line so there are no surprises on the bill. Here’s what typical jobs cost in this market:
- Single window sash rebalance or hardware repair: $125-$275
- Fogged IGU replacement (standard double-hung or casement sash): $235-$480 per sash depending on glass size and coating
- Custom shape window replacement (arch-top, trapezoid, octagon): $800-$2,400 installed, depending on frame size, glass package, and whether impact-rated glass is required
- Sliding patio door roller and track repair: $225-$425
- Full custom door replacement in a Simonton-compatible frame: $1,900-$4,500 for a standard opening; oversized or impact-rated units run higher
What moves the price: glass package (clear vs. Low-E vs. impact), whether the frame itself is square or needs re-shimming, and how far into the opening the old caulk and flashing have deteriorated. On custom shape glass, lead time is the biggest variable - the more unusual the geometry, the longer the fabrication. We’ll give you a written quote before we start, and our Done Right Promise means if something isn’t right, we come back and fix it. Call (727) 261-2215 for a free estimate with exact numbers for your opening.
Why Coral Springs Homeowners Call TruePane Windows & Doors for Simonton Work
We’ve been setting windows and doors in this community since 2008, and we founded TruePane in 2008 because Dale kept seeing the same two problems on Simonton jobs: units installed out of true, and warranties voided by careless workmanship. We set our name as the permanent reminder of what matters: if the pane is not true, the job is not done. Every job carries a Done Right Promise, and both manufacturer warranty layers get registered in writing before we back out of your driveway. We’re also authorized installers for more than a dozen lines -, PGT, and others - so if your unit isn’t worth saving, we’ll quote you side-by-side replacements on paper and let you decide with your eyes open. A live person answers our phone at (727) 261-2215, 24 hours a day, every day. Not a call center. One of us.
FAQs
No, we are an independent Simonton service provider. That means we work on Simonton windows and doors every week in Coral Springs, but we don’t answer to Simonton’s sales quotas or their replacement-only playbook. When a repair makes more sense than a replacement, we’ll tell you. When replacement is the honest call, we’ll quote it. The choice is always yours.
It depends on the repair, the age of the window, and whether the unit is still under Simonton’s limited lifetime warranty. Some warranties cover specific parts and glass for designated periods. Our practice is to register both warranty layers in writing and document the work so nothing gets voided by a careless repair. If your unit is still under warranty, we’ll check coverage before we do any paid work. Call (727) 261-2215 and we’ll walk through what your model qualifies for.
Yes. Simonton has discontinued or rebranded several older custom lines, but the frame specs and glass dimensions can be matched through our fabrication partners. We measure the existing glass and frame openings precisely, then order or cut a custom unit that fits the location - even on half-rounds, ellipticals, and oversized panels. Lead time runs longer on unusual geometry, so we’ll give you a firm timeline when we quote.
Most single-sash repairs - balance replacements, weatherstripping, roller swaps, IGU orders for standard sizes - are scheduled within a few days and completed in one visit. Custom shape glass and full replacement units take longer because the fabrication is built to your exact dimensions. We’ll give you a specific date when we take the measurements, and we’ll be there when we say.
Repair if the frame is square, the glass is clear, and the problem is hardware, weatherstripping, or a single failed sash. Replace if the frames are cracked or warped, multiple units are fogging, or you want impact-rated glass that the original windows don’t have. Coral Springs sits in a high-wind zone, and many older Simonton units planted in the 90s weren’t built for the current code. We’ll give you a straight answer either way, with numbers on paper. Call (727) 261-2215 for a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Springs and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.