Therma-Tru Impact Garage Doors Nationwide | TruePane Windows & Doors

Therma-Tru Impact Garage Doors: The Coral Springs Owner’s Guide

We stock and install Therma-Tru impact-rated garage doors throughout Coral Springs, with most complete door replacements running between $2,800 and $6,500 installed depending on size, series, and wind-load requirements. Typical turnaround is 3 to 5 business days once we confirm your rough opening and panel profile. The way most Coral Springs homeowners find out their Therma-Tru garage door has reached the end of its service life is not dramatic: a panel starts binding in the track, the seal at the bottom tears loose after a heavy afternoon storm, or the impact rating sticker fades and a home inspector flags it before a sale.

Call (727) 261-2215

If you are reading this, you have probably noticed one of those things, or you have a specific part, a roller, a cable, a hinge, a panel, that finally let go. You want to know what it costs, whether it can be matched to your existing door, and who in Coral Springs will do the work without turning a simple job into a three-week headache. That is what we do here.

Which Therma-Tru Models This Applies To

Therma-Tru does not manufacture garage doors under its own name. The Therma-Tru impact garage doors you see in Coral Springs are nearly always built by one of two manufacturers, C.H.I. Overhead Doors or Clopay, and sold through Therma-Tru’s dealer network as a bundled entry-door and garage-door package. That is the first compatibility gotcha: the label on the inside of your door panel will say C.H.I. or Clopay, not Therma-Tru, and that label is what determines which parts match. Look for a white sticker near the bottom panel or on the end stile. It lists the model number, the manufacture date, and the wind-load designation, usually Miami-Dade NOA or Florida Building Code approval number.

The second gotcha is sizing. Therma-Tru bundled garage doors in Coral Springs run disproportionately to 16-foot and 18-foot widths, because most homes in this market were built with two-car garages. An 8-foot-tall door is common in newer sections of Heron Bay and the Reserve at Sawgrass, while older sections of Ramblewood and Cypress Glen more often have 7-foot doors. We measure every rough opening twice before ordering anything, because a half-inch discrepancy on an impact-rated door means the difference between a clean install and a door that fights the track for the rest of its life. We match OEM parts when the door is under warranty and a quality aftermarket equivalent, usually from C.H.I. or Amarr’s impact lines, when it is not. For doors over eight years old in Coral Springs, aftermarket is usually the right call: you get the same Miami-Dade certification at roughly two-thirds the OEM price.

We also stock and service compatible parts for PGT, CGI, and CWS impact garage doors, and we are an independent service provider. We are not affiliated with Therma-Tru.

Signs Your Therma-Tru Impact Garage Door Is Failing

• The door binds or shudders halfway up the track. In Coral Springs, this is usually a worn roller or a slight track misalignment that gets worse as humidity swells the wood framing around the opening. Left alone, it strains the opener motor and shortens the life of every moving part.
• The bottom seal is cracked, flattened, or peeling away from the panel. That seal is doing real work in Coral Springs. When it fails, driving rain blows under the door, and worse, insects, leaves, and the fine muck from afternoon thunderstorms find their way into the garage. A replacement seal is inexpensive; the cleanup from a flooded garage is not.
• You see daylight around the edges of the closed door. Impact-rated doors rely on a tight seal around the entire perimeter to meet their wind-load rating. If you can see light, the door is no longer performing to spec, and your insurance carrier may have something to say about that.
• The impact sticker is unreadable. Coral Springs building inspectors and insurance adjusters check that sticker. If it has faded, peeled, or been painted over, you cannot document that your door is impact-rated. We can often source a replacement certification sticker through the manufacturer if the door is still in production.
• The opener is working harder than it used to. If you hear the motor laboring, or the door slams at the bottom of its travel, the torsion spring is losing tension. That is not a part to guess about. More on that below.

Replacement Cost & What’s Included

In Coral Springs, an installed Therma-Tru impact garage door replacement, panel-for-panel, ranges from $2,800 to $6,500. Here is how that breaks down:

• Single-car impact door, 8×7: $2,800 to $3,600 installed
• Two-car impact door, 16×7: $3,800 to $5,200 installed
• Two-car impact door, 18×8: $4,700 to $6,500 installed
• Panel-only replacement, matched to existing door: $900 to $1,800 per panel depending on height and finish
• Hardware kit (rollers, hinges, cables, bottom seal): $300 to $650 installed

The range is driven by three things: door size, panel gauge and insulation value, and whether you want a standard paint finish or a woodgrain-textured finish. A 24-gauge polyurethane-insulated 16×7 door costs more than a 26-gauge polystyrene panel, but it also holds up better against the heat and humidity of a Coral Springs summer and it is quieter on the track. Every quote we give is a written, line-item price. You will see the door, the hardware, the labor, and the permit fee listed separately. We pull the permit, we schedule the inspection, and we register the manufacturer warranty before the truck leaves your driveway. That is The Keystone Standard, and it has been since the day Dale Kessler opened TruePane.

DIY or Call Us?

Some of this work is safe to inspect yourself. You can look at the bottom seal, check for daylight around the perimeter, and read the model sticker. That is useful information to have when you call us, and it helps us quote the job accurately over the phone.

What you should not do is touch the torsion spring. That spring is under enough tension to remove a finger or worse, and the tools to safely release and re-tension it are not sitting in most Coral Springs garages. Same goes for the lift cables: if one lets go while you are working, the door can drop without warning. A door that weighs 180 pounds falling under spring tension is a serious injury waiting to happen. We say this not to scare you off the job, but so you know where the line is. Check the seal, read the sticker, call us. If you are not sure whether something is safe to handle, call (727) 261-2215 and describe what you are seeing. We will tell you straight, no charge for the phone call.

FAQs