Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Repair in Coral Springs: What to Know First
Independent Therma-Tru roof repair in Coral Springs typically runs $275 to $650 for most flashing, seal, and curb-mount fixes, with most jobs completed in a single visit. We are not affiliated with Therma-Tru, but our technicians have opened enough Therma-Tru units across Broward County to know exactly where they fail after a decade of Florida sun and what it takes to set them right. If you own a Therma-Tru skylight, roof window, or door-with-transom that’s leaking, call (727) 261-2215 for a straight answer and a free estimate.
This page is for homeowners in Coral Springs, Parkland, Margate, and the surrounding communities who have water coming in around a Therma-Tru product and want to know what’s actually wrong before anyone starts charging by the hour. We walk you through the common failure points, what a proper repair looks like, and what it costs, so you can compare us to anyone else with your eyes open.
How Therma-Tru Products Fail - and How We Fix Them
- Fiberglass curb-mount skylight flashing separation. Therma-Tru’s curb-mount skylights, including the Sunscape series installed in a lot of Coral Springs homes built in the 1990s and 2000s, sit on a wood or metal curb. The factory flashing kit works fine for the first several years, but the sealant bond between the flashing and the roof membrane breaks down under Florida’s UV load and the daily thermal cycling of a shingle roof hitting 140 degrees in August. Water creeps under the flashing, follows the curb, and shows up as a ceiling stain that’s nowhere near the skylight itself. We strip the old flashing, inspect the curb for rot, and re-flash with a headlap pan that drains the way the original should have.
- Weep-hole blockages on Therma-Tru door transoms. Therma-Tru fiberglass entry doors with transom window units above them are common on older Coral Springs ranch homes. The transom frame is designed to channel water out through weep holes at the sill, but two decades of pollen, dust from the Sawgrass Expressway corridor, and the fine limestone dust that settles through Florida screens will plug those holes completely. Water pools in the frame channel, then leaks backward into the drywall above the door. The fix is usually a frame-channel cleaning, weep-hole clearing, and sill-seal replacement. Most owners who call us think they need a new roof, and they don’t.
- Therma-Tru roof-window operator gear failure. Therma-Tru’s manual and motorized roof windows use a gear-driven operator to open and close the vent. In coastal-adjacent climates like Coral Springs, the gears take on corrosion from humidity and the salt tinge in the air off the Atlantic, and the window either seizes shut or won’t seal tight when closed. A window that won’t seal is a leak waiting for the next afternoon thunderstorm. We replace the operator assembly with factory-grade parts and adjust the latching mechanism so the gasket compresses evenly all the way around.
- Fiberglass frame stress cracks at the mounting flange. Therma-Tru fiberglass frames are tough, but they are not indestructible. On roof windows and skylights that were screwed down a touch too tight during the original install, hairline cracks form at the flange screw points after years of thermal expansion and contraction. The crack itself doesn’t always leak immediately, but it becomes a water path once the roof sealant ages and shrinks. We repair the frame with fiberglass bond and re-anchor the unit at the correct torque, which is less than most gut-installers assume.
- Degraded butyl tape at the deck seal. Therma-Tru roof windows that flash directly to the roof deck rely on a butyl tape seal between the frame and the underlayment. That tape has a real lifespan, and in Coral Springs it shortens by several years compared to cooler climates. When it fails, you get slow weeping leaks that track along the roof deck and stain the ceiling at the lowest point in the room. We lift the unit, scrape the deck clean, and re-set it with fresh butyl and a stepped flange flashing that carries water over the seam instead of into it.
Our Therma-Tru Roof Repair Process
When you call TruePane Windows & Doors about a Therma-Tru roof repair, here’s what happens:
- 1
You call, a live person answers. Not a voicemail tree. We’ll ask what you’re seeing, when it started, and which Therma-Tru product you have. If you don’t know the model, we’ll figure it out when we get there.
- 2
We schedule the visit and show up when we say. Our technicians arrive in uniform, with background checks already on file. We’ll walk the roof or the attic with you, depending on the situation.
- 3
Diagnosis before anything else. We trace the water, not just the stain. That means opening the interior drywall if needed, running water tests where it’s safe, and checking the curb, flashings, and frame corners. We tell you what we found and what we didn’t find, in plain terms.
- 4
Parts decision, made with you. If the repair calls for a replacement part, we’ll show you the OEM option and the quality aftermarket option side by side on paper, with prices. No hidden markups, no mystery.
- 5
The repair, done right. We re-flash, re-seal, re-set, or replace the operator as planned. Every opening gets measured twice before anything gets cut or anchored.
- 6
Test and guarantee. We run a water test where the repair allows, then walk you through what we did. The work is covered by our Done Right Promise. If it’s not right, we come back and make it right, no paperwork fight.
Measure it right the first time, and the rest of the job takes care of itself. That’s the rule, and it applies to a $300 re-flash just as much as a full skylight replacement.
What Therma-Tru Roof Repair Costs in Coral Springs
Here’s what we charge for common Therma-Tru roof repair scenarios in Coral Springs. These are line-item, written quotes, not verbal estimates that shift once the ladder goes up:
| Repair | Typical Cost | Notes |
|---|---|---|
| Curb-mount skylight re-flash | $275 - $450 | Includes stripping old sealant, curb inspection, new headlap flashing |
| Weep-hole clearing and sill re-seal (transom) | $165 - $285 | Most common fix on older Therma-Tru entry doors in Coral Springs |
| Roof-window operator replacement | $310 - $540 | Gear assembly plus adjustment, factory-grade parts |
| Frame stress-crack repair | $250 - $400 | Fiberglass bond, proper re-anchor at correct torque |
| Full deck re-seal with butyl and step flashing | $450 - $650 | Unit lift, deck prep, new tape and flashing |
What moves the price: roof pitch and access, the age of the unit, whether the curb itself needs carpentry, and whether the original install left you with something we have to undo before we can redo it. We give you the number before we start, and we don’t hand you a change order unless we find something structural nobody could have seen from the ground. Call (727) 261-2215 for a free estimate.
Why Coral Springs Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve been serving Coral Springs families since 2008 under the leadership of Dale Kessler, who grew up in Ramblewood and learned the cost of a bad seal before he learned to drive. TruePane isn’t a franchise playbook. We hire local, train apprentices into journeymen, and register both warranty layers in writing before the truck leaves your driveway under The Keystone Standard. If a Therma-Tru unit is beyond a sensible repair, we quote it straight and we also work with PGT, CGI, CWS, and ES Windows products so you can compare what’s actually available, side by side, on paper. We’ve fixed enough Therma-Tru roof openings in this city to know what’s repairable and what’s not, and we’ll tell you the truth either way. Our work carries a Done Right Promise, and we stand behind it, in writing, no arguing.
FAQs
Therma-Tru roof windows and skylights typically carry a limited warranty that covers manufacturing defects, but the warranty generally excludes failure of the roof flashing, sealants, or installation workmanship. As an independent Therma-Tru service provider in Coral Springs, we can inspect the unit and give you an honest read on whether the problem is a defect or a wear item before you go through the warranty claim process. We register no manufacturer warranties ourselves, since we are not an authorized Therma-Tru dealer. Call (727) 261-2215 and we’ll help you sort out what’s covered and what isn’t.
For critical components like operators, hinges, and latching hardware, we use factory-grade Therma-Tru parts whenever the unit’s age and compatibility allow. For flashing, sealant, and curb materials, we use commercial-grade products that meet or exceed the original spec. We’ll show you both options on paper with prices before we order anything, and you make the call. If you’d rather have a full OEM repair, we’ll price it that way and do it that way.
If the frame is structurally sound and the glass is not cracked or fogged, a repair usually makes sense in Coral Springs because the unit itself is often in decent shape and the failure is in the flashing or the seal. If we find frame rot, a failed insulated glass unit, or a curb that’s too far gone, we’ll tell you to replace and show you your options across Therma-Tru and comparable lines like PGT, CGI, CWS, and ES Windows. We don’t repair things that will fail again in two years, period.
A live person answers our phone 24 hours a day, 7 days a week, and we schedule estimates quickly, but we won’t promise a time we can’t keep. For an active leak, we’ll prioritize you over a non-urgent quote. Call (727) 261-2215 and we’ll give you a real arrival window, not a vague “sometime next week.”
No, unless we uncover structural damage that no one could have seen before we started. We quote in writing, we don’t pad the bill, and we don’t play the change-order game. That’s part of the Done Right Promise and it’s part of how TruePane has done business in Coral Springs for over four decades. Call (727) 261-2215 for a free estimate, and the number you hear is the number you’ll see on the invoice.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Coral Springs and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.