Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Hillsboro Beach
Door installation in Hillsboro Beach is not a one-spec-fits-all job. This barrier island, flanked by the Atlantic on the east and the Intracoastal Waterway on the west, puts every door opening under omnidirectional salt load. Our Door Installation team handles impact-rated replacements, corrosion-resistant hardware, and the framing corrections older homes here routinely require. If you are planning a door replacement, call (727) 261-2215 for a free estimate and a straight answer about what your opening actually needs.
Why TruePane Windows & Doors Is Hillsboro Beach’s Preferred Door Installation Company
Hillsboro Beach homeowners call us because we do not treat a door as a simple swap. We treat it as an opening that has to hold up under hurricane wind loads, decades of salt spray from two directions, and Broward County’s High Velocity Hurricane Zone (HVHZ) enforcement. That changes how we measure, what we spec, and what we write into the contract before we pull the first screw.
Dale Kessler founded TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. That rule governs every door we install in Hillsboro Beach. Our technicians arrive background-checked and uniformed, measure every opening twice, and quote manufacturer lines side by side on paper. No surprise line items on the bill. The Done Right Promise backs the work. If it is not done right, we make it right. No paperwork fights, no arguing.
We know this town. We know that the salt air does not favor the ocean side over the Intracoastal side here. We know what a 1970s aluminum jalousie frame looks like once it comes out of the wall. And we stock the corrosion-resistant hardware and flashing material this environment demands, so a Hillsboro Beach job does not stall waiting for parts a mainland supplier never carries.
Our Door Installation Services in Hillsboro Beach
We install the full range of residential doors, but on Hillsboro Beach the work concentrates around a few types. Here is what we handle most often and what each one actually involves on this island.
Entry & Swing Doors
An entry door in Hillsboro Beach does more than welcome guests. It is the first line of defense against wind-driven rain, salt spray, and the HVHZ missile-impact test. A typical impact-rated fiberglass or steel entry door installation in Hillsboro Beach runs $2,800-$5,600 depending on the door slab, hardware finish, and whether the rough opening needs reframing. We spec the same corrosion-resistant hinges, threshold, and weatherstripping on an Intracoastal-facing door as we do on the ocean side. There is no “cheaper” elevation on this island.

Double & French Doors
Double French doors are common in Hillsboro Beach homes built in the 1960s through 1980s, especially where the original floor plan opens to a patio or Intracoastal view. The original units are almost always single-pane, non-impact, and held together by aluminum frames that have corroded at the threshold. In Hillsboro Beach, a full impact-rated double French door replacement typically runs $5,200-$11,500, depending on glass package, frame material, and whether we have to enlarge the rough opening to meet current structural requirements. We quote the full number before we start. You see exactly what you are buying, in writing.

Bifold & Folding Doors
Folding door systems are popular on Hillsboro Beach renovations where the homeowner wants the living space to open fully to the view. These are heavy units with many moving panels, and on a barrier island with constant salt exposure, the hardware quality matters more than the glass. A bifold door installation in Hillsboro Beach generally runs $7,000-$18,000 depending on the number of panels, the aluminum or fiberglass frame, and the structural header work required. We register both manufacturer warranty layers in writing before the truck leaves the driveway.

Pivot Doors
Pivot doors are a statement piece in the newer Hillsboro Beach estates and condominium remodel projects. They are also one of the most misunderstood installations. A pivot door carries its entire weight on a top and bottom hinge mechanism rather than traditional side hinges, and the rough opening has to be dead level and reinforced to carry that load through decades of use and wind pressure. In Hillsboro Beach, a pivot door installation typically starts around $6,500 and can exceed $15,000 for large-format impact-rated units. If we open the wall and find the original framing was never built for a pivot door, we stop, price the correction in writing, and get your approval before proceeding.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hillsboro Beach
We are an authorized installer for manufacturer lines including PGT, and we carry the corrosion-resistant hardware packages those brands specify for high-salt coastal environments. Our technicians understand which impact-rated product approvals actually meet Broward County HVHZ enforcement, versus which marketing documents do not. We quote side by side on paper so you can compare the glass package, the frame material, and the hardware finish line by line. No vague upgrade language. And because our crews serve Door Installation in Hillsboro Beach regularly, we keep the flashing tape, sill pans, and stainless fasteners this salt environment requires in our local stock.
Common Door Installation Problems We See in Hillsboro Beach Homes
When we pull an old door on Hillsboro Beach, we rarely find a clean opening. Here is what we actually see:
- Corroded aluminum thresholds. Original 1960s-80s aluminum door frames corrode through at the threshold within 15-20 years from omnidirectional salt exposure. The panel goes loose and unsealed even when the glass still looks fine, and the door no longer latches or seals against wind-driven rain.
- Failed flashing tape at the base of ocean-facing doors. Wind-driven rain and saltwater wick into the subfloor behind failed flashing, rotting the rough opening. Once the permit inspection opens the wall, the repair becomes a full reframe, not a simple door swap.
- Non-impact sliding glass doors from before the HVHZ mandate. The original units are so under-engineered for today’s required missile-impact test that the rough opening must be enlarged and reinforced. That structural framing work costs money the original quote did not anticipate, and any honest contractor writes it into the contract up front.
- Fogged glass on Intracoastal-facing French doors. The west side of a Hillsboro Beach home faces just as much salt and moisture as the east side. Seals fail early when doors were not originally built for a marine environment, and the glass fogs between the panes within a few years.
Pricing for Door Installation in Hillsboro Beach, FL
Door installation in Hillsboro Beach runs higher than inland Broward communities, and for good reason. The materials are not optional: impact-rated glazing, corrosion-resistant frames, stainless hardware, and HVHZ-compliant flashing are mandatory under local code enforcement. A straightforward impact-rated entry door replacement ranges from $2,800 to $5,600. French and double doors run $5,200 to $11,500. Bifold and pivot systems start around $6,500 and can exceed $18,000 for large openings with structural work. The variables are the size of the opening, the condition of the existing framing, and the glass package you select. We put every number on paper before the job starts. Call (727) 261-2215 for a free estimate and a fixed, written quote.
We Also Serve Cities Near Hillsboro Beach
Our crews work throughout north Broward. We serve Hillsboro Beach and the surrounding communities including Coral Springs, Margate, Parkland, and Tamarac. If you are in one of those areas and need door installation, call (727) 261-2215 and we will schedule a time to measure and quote.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Hillsboro Beach
Hillsboro Beach sits inside Broward County’s High Velocity Hurricane Zone, and the local building department enforces impact-rated product approvals on every window and door replacement. No shutters-plus-standard-window workaround is permitted. The permit and inspection are not optional; they are how the town verifies the opening meets the wind-load and missile-impact requirements. We pull the permit, schedule the inspection, and build the framing and waterproofing work into the contract from day one. Call (727) 261-2215 if you want to know what your specific opening will require.
No. Original jalousie and single-pane aluminum frames from the 1960s through 1980s do not meet current HVHZ impact requirements and are almost always corroded through at the threshold. Reusing the frame would fail inspection and leave you with a door that cannot hold a missile-impact-rated panel. We replace the entire unit and bring the rough opening up to current code before setting the new door. Call (727) 261-2215 for a free assessment.
Not on Hillsboro Beach. The island is only a few hundred feet wide in most places, so the salt-air load is omnidirectional. Aluminum frames on the west, or Intracoastal, side corrode at nearly the same rate as true oceanfront exposures. We spec identical corrosion-resistant hardware and impact-rated glazing on every elevation. There is no protected side to cut costs on. Call (727) 261-2215 and we will walk you through what that means for your specific doors.
We stop, photograph the condition, and price the structural correction in writing. The rough opening must be enlarged and reinforced to carry today’s impact-rated pivot door, and that work adds framing and possibly header costs the original quote did not anticipate. You approve the number before we touch anything further. No change orders hidden in the fine print. Call (727) 261-2215 for an honest pre-inspection before you commit to a pivot door replacement.
Because your west-side door faces the Intracoastal, not a protected interior lot. The same salt-fog and humidity that corrodes the frame also works on the insulated glass seal. Once the seal fails, moisture gets between the panes and fogs the glass. The fix is a full replacement with a marine-rated sealed unit in a corrosion-resistant frame, not a glass-only repair. Call (727) 261-2215 and we will quote the correct unit for a salt-exposed elevation.
If you are planning door installation in Hillsboro Beach, start with a free estimate. Call TruePane Windows & Doors at (727) 261-2215. A live person answers, we schedule a time to measure, and you get a written quote before you commit to anything.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hillsboro Beach and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After