Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFull Frame Replacement in Coral Springs, FL
Full frame replacement is a complete window installation where we strip the existing window down to the rough opening, removing the entire frame, the sash, and the brick mold. In Coral Springs, we often recommend this when the old wood frames have suffered dry rot from our humid Florida summers or when the existing structure has settled to the point that a simple insert window won’t operate properly. Unlike a pocket replacement that fits a new window into an old, potentially damaged frame, a full frame replacement allows us to inspect the rough opening for water intrusion and ensure the new unit is properly flashed and insulated.
At TruePane Windows & Doors, we handle full frame projects for homeowners who want their windows installed correctly the first time. We are a second-generation glazier operation founded by Dale Kessler, and we treat every home like our own. If you are noticing soft spots in your window sills or your windows are binding in the heat, you might be a candidate for this service. We encourage you to call (727) 261-2215 to discuss your specific situation. You can also review our broader Window Replacement in Coral Springs services to see how we handle different installation methods.
When You Need Full Frame Replacement
Deciding between a pocket replacement and a full frame replacement usually comes down to the condition of the existing structure. We do not upsell; we inspect. If the frame is sound, we will tell you. However, there are specific scenarios in Coral Springs where a full frame replacement is the only responsible way to proceed.
- Significant Wood Rot: If your current frames are made of wood and have been exposed to moisture for years, the structural integrity is likely compromised. We remove the rotted wood entirely to ensure no mold or decay remains inside the wall cavity.
- Frame Out of Square: Florida homes settle over time. If your existing window opening is no longer square or plumb, an insert window will not seal properly, leading to air gaps. A full frame replacement allows us to shim and level the rough opening before the new unit is set.
- Changing Window Size or Style: If you want to change the size of your opening, such as converting a small window into a larger picture window or changing a single-hung to a sliding unit, we must remove the entire frame to adjust the rough opening size.
- Persistent Water Leaks: If you have experienced recurring leaks that have damaged the surrounding drywall or flashing, we need to open the wall to inspect the flashing tape and barrier. A full frame replacement gives us the access needed to correct the waterproofing system.
- Desired Increase in Glass Area: Some older window frames have thick, bulky profiles. By removing the old frame entirely, we can often utilize more of the rough opening, allowing for a slimmer frame profile and more visible glass area with brands like PGT or Jeld-Wen.
Our Full Frame Replacement Process
We approach full frame replacement with a commitment to the craft. Dale Kessler established our founding rule: if the pane is not true, the job is not done. This philosophy dictates every step of our installation process.
- Inspection and Measurement: We measure every opening twice. Our technicians inspect the exterior cladding and the interior trim to determine the extent of the work required. We do not guess; we measure so we can order the exact size needed for a tight fit.
- Removal: We carefully remove the existing window sash, the frame, and the exterior trim. We take care to protect your surrounding walls, siding, and flooring during this phase.
- Rough Opening Preparation: Once the old frame is out, we inspect the wood studs for rot or termite damage. If we find issues, we address them before moving forward. We then apply new flashing tape and a weather-resistant barrier to ensure the opening is sealed against the Coral Springs humidity.
- Setting the New Unit: We install the new window frame, shimming it until it is perfectly plumb, level, and square. This is the most critical step for operation and long-term performance. We secure it to the rough opening using approved fasteners.
- Insulation and Sealing: We insulate the cavity between the new window frame and the rough opening to prevent air and water infiltration. We then apply high-quality exterior sealant around the perimeter.
- Finishing and Trim: We reinstall the interior and exterior trim to match your home’s aesthetic. We clean the area, test the operation of the window, and verify that the warranty documentation for the product is ready to be registered.
Full Frame Replacement Pricing in Coral Springs
Full frame replacement is more labor-intensive than a standard insert replacement because it involves stripping the opening and managing the exterior flashing. In the Coral Springs market, homeowners should expect a higher investment for this level of work. While every home is different, the following table provides a realistic range for budgeting purposes.
| Window Type | Estimated Cost per Opening (Installed) |
|---|---|
| Standard Single-Hung Window | $950 - $1,400 |
| Large Picture Window | $1,200 - $2,100 |
| Sliding Window (3-Lite) | $1,300 - $1,900 |
| Casement Window | $1,100 - $1,750 |
These ranges include the removal of the old unit, minor framing adjustments, the new window, professional installation, and our Done Right Promise. Factors that can influence the final cost include the type of glass required for hurricane impact codes, the complexity of the exterior trim, and the condition of the underlying structure. We provide upfront, written quotes for every project so you know exactly what you are paying for. Call (727) 261-2215 for an accurate estimate.
FAQs - Full Frame Replacement
How can I tell if I need a full frame replacement or just an insert?
You typically need a full frame replacement if the current wood frame is rotted, structurally unsound, or if the opening is significantly out of square. If your existing frame is in good condition and the window size is correct, an Insert Window Replacement is often sufficient. We inspect your windows during our consultation and will tell you honestly which method is required for the longevity of your home. Call (727) 261-2215 to schedule an inspection.
Is full frame replacement covered by the Done Right Promise?
Yes, all of our installations, including full frame replacements, are backed by our Done Right Promise. If you find an issue with the operation, the seal, or the installation within 90 days, we return to make it right. We do not argue, and we do not hide behind fine print. We register both manufacturer warranty layers for you before we leave your driveway, ensuring you have the protection you paid for.
How long does a full frame replacement take?
Most full frame replacements are completed in a single visit, though the exact duration depends on the number of windows and the condition of the openings. Because we are a local company serving the Coral Springs area, we plan our logistics to ensure we have the time to do the job properly without rushing. Our technicians arrive prepared with the tools and materials needed to finish the work in one trip.
Do you handle the permit requirements for window replacement in Coral Springs?
Yes, we manage the necessary permitting for our window replacement projects to ensure compliance with local building codes. Florida has strict requirements for impact resistance and wind loads, and we ensure that the windows we install meet or exceed these standards. We handle the paperwork so you do not have to worry about the regulatory side of your renovation. Call (727) 261-2215 to get started.
We are ready to help you with your Window Replacement needs. Whether you are looking for energy-efficient upgrades or need to address structural issues with your current frames, our team has the experience to ensure the work is done to The Keystone Standard. We invite you to call (727) 261-2215 for a free estimate and to see why we have been a trusted choice in the community since 2008.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.