Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPatio Sliding Doors in Coral Springs, FL
Patio sliding doors in Coral Springs typically cost between $2,200 and $5,500 fully installed, though the final price depends heavily on whether you select standard tempered glass or high-velocity hurricane-impact glass. Replacing a sliding door is a precise task that requires leveling the frame to within a fraction of an inch to prevent future binding, which is why we measure every opening twice before ordering any materials. At TruePane Windows & Doors, our Sliding & Patio Doors services cover the entire process from removal to final trim, ensuring your new door operates smoothly from the first day.
When you call us for an estimate, you are speaking to a company that has served local communities since 2008. Founded by second-generation glazier Dale Kessler in 2008, we operate on a simple principle: if the pane is not true, the job is not done. We provide upfront, written quotes for brands like PGT, CGI, and Jeld-Wen, and we stand by our work with the Done Right Promise. If you are looking for a company that values craft over speed, call us at (727) 261-2215 for a free estimate.
When You Need Patio Sliding Doors
Most homeowners in Coral Springs do not realize their patio sliding doors are failing until the door becomes difficult to open or the interior floor shows signs of water damage. Because of our local climate, which combines intense UV exposure with heavy seasonal rains, door systems face significant stress. We recommend inspecting your doors for the following symptoms:
- Binding or Heavy Operation: If you have to lift the door panel slightly to get it to slide, the rollers have likely failed or the track is clogged with debris and corrosion. This is common in older homes where the original aluminum tracks have pitted over time.
- Fogging Between Glass Panes: This indicates the seal on your insulated glass unit has failed, allowing moisture to enter the space between the panes. Once this happens, the glass cannot be repaired and the unit must be replaced to restore clarity and energy efficiency.
- Drafts and Air Leaks: If you can feel air moving around the edges of the door frame or if you see light gaps when the door is locked, the weatherstripping has likely compressed or disintegrated. This forces your air conditioning system to work harder to maintain a comfortable temperature in your home.
- Corroded Hardware: The locking mechanism and handle sets are exposed to the elements. If the lock feels “mushy” or the handle requires excessive force to engage, the internal components are likely compromised by salt air and humidity, posing a security risk to your home.
- Water Intrusion After Storms: If you notice water pooling on the interior track or staining the floor after a heavy Florida rain, the weep system is likely blocked or the flashing was not installed correctly. This requires immediate attention to prevent rot in the subfloor or wall framing.
If you are experiencing any of these issues, it is often more cost-effective to replace the unit than to attempt a repair on an aging frame. We focus on providing Sliding & Patio Doors in Coral Springs that are built to withstand the unique pressures of our local environment.
Understanding Your Material Choices
Choosing the right patio door-including Pocket & Barn Doors-is not just about the look. It is about how the material reacts to the Coral Springs sun and moisture. We guide our customers through the options so they understand exactly what they are buying.
Aluminum Frames
Aluminum is a traditional choice in South Florida. It is strong, rigid, and holds up well under the intense heat. Modern aluminum doors are thermally broken, meaning they have a barrier that prevents heat transfer from the outside to the inside. These are excellent for large-span openings where you want thinner frames and more glass.
Vinyl Frames
Vinyl is a popular choice for its energy efficiency and low maintenance. It does not rust, corrode, or need painting. High-quality vinyl frames are reinforced with metal or composite materials to ensure they remain rigid under wind pressure. These are ideal for homeowners who want a quiet, energy-efficient door that essentially takes care of itself.
Impact-Rated Glass
In our region, impact-rated glass is not just a luxury; it is a necessity for security and storm protection. These doors use a laminate interlayer between two sheets of glass. If the glass is struck by debris, it may crack but it stays in the frame, keeping the weather and intruders out. We are an authorized installer for brands like PGT and CGI, and we ensure every impact door is registered with the manufacturer’s warranty before we leave your driveway.
Our Patio Sliding Doors Process
We do not treat installation as a transaction. We treat it as a craft commitment. When we arrive at your home in Coral Springs, we follow a strict process to ensure the door is installed to the manufacturer’s exact specifications.
- Precision Measurement: We measure the rough opening at three different points, both horizontally and vertically. We account for the thickness of the frame, the clearance for the rollers, and the specific needs of your existing wall construction.
- Site Preparation and Protection: Before we remove the old door, we protect your floors and furniture. We remove the old door, frame, and threshold carefully to avoid damaging the surrounding stucco or drywall.
- Opening Inspection: Once the old unit is out, we inspect the rough opening for rot or structural issues. We never cover up a problem. If the wood sill needs repair, we address it then and there so the new door has a solid, level foundation.
- Setting the Frame: We set the new frame and ensure it is perfectly plumb, level, and square. This is the most critical step. If the frame is even slightly out of alignment, the door will bind, the locks will not engage properly, and the seals will leak. We use shims and high-grade sealants to create a weathertight barrier.
- Glass and Panel Installation: We install the glass panels and adjust the rollers. This is where the “TruePane” standard comes in. We adjust the rollers so the door glides with a single finger, yet remains secure.
- Final Testing and Cleanup: We test the door’s operation, the locking mechanism, and the weatherstripping. We clean the glass and the work area, leaving your home as clean as we found it. We then review the warranty registration with you so you have all the paperwork in hand.
If you are considering a new installation, please return to our home page to see the full range of services we offer. We are here to help you make the right choice for your home.
Patio Sliding Doors Pricing in Coral Springs
We believe in a square deal. That means upfront pricing with no surprises on the final bill. While every home in Coral Springs has different requirements, we have outlined typical pricing ranges below to help you budget for your project. Please note that these are estimates for high-quality, professional installations. We do not cut corners on materials or labor.
| Project Type | Estimated Price Range |
|---|---|
| Standard Replacement (Vinyl, Non-Impact) | $2,200 – $3,200 |
| Mid-Range Replacement (Aluminum, Impact-Rated) | $3,500 – $5,000 |
| Premium Multi-Slide System (Custom Sizing) | $5,500+ |
Several factors influence the final cost. The size of your opening is the primary driver. If you have a custom-sized opening that requires structural modifications, the labor cost will increase. Your choice of glass-whether it is double-pane, low-E, or hurricane-impact-also changes the material cost. Finally, the complexity of the installation, such as working on a second floor or dealing with complex exterior trim or a Heavy-Duty Sliding Doors system, will be factored into your custom quote. Call (727) 261-2215 for an exact quote. Estimates are always free.
Safety and Professional Installation
A note on safety: sliding patio doors are heavy. A single glass panel can weigh well over 100 pounds. Attempting to remove or install these panels without the proper lifting equipment and experience is a significant safety risk. You risk not only damaging the door or your home but also sustaining serious injury. Furthermore, if a door is not installed correctly, it can fail to provide the security or weather protection you expect. We strongly recommend using a trained professional for all door installations. We are licensed and insured, and we bring the equipment and experience to get the job done safely.
FAQs - Patio Sliding Doors
Is it cheaper to repair or replace my sliding door?
In most cases, if your door is more than 15 years old, it is more cost-effective to replace it than to repair it. Repairs on older doors-such as replacing rollers or tracks-are often temporary because the original materials have reached the end of their lifespan and the replacement parts may not fit perfectly. Replacing the unit gives you a new warranty, better energy efficiency, and modern security features. Call (727) 261-2215 for an assessment of whether your door is a candidate for repair or if it is time for a replacement.
How long does it take to install a new patio door in Coral Springs?
Most standard patio door replacements are completed in a single day. We arrive, remove the old unit, prep the opening, install the new door and any Screen Door Installation, and clean up, all before we leave. For larger, multi-panel or custom-sized systems, we may need a second day, but we will always communicate the timeline clearly before we start.
Can you match the style of my existing doors?
Yes, we work with over a dozen manufacturers, including Pella, Andersen, Marvin, and PGT, which allows us to match the aesthetic of your home. Whether you have a modern home with clean lines or a more traditional style, we can source a door that complements your architecture while providing the performance you need. We bring samples and manufacturer literature so you can see the options side-by-side.
What makes TruePane’s installation different?
We back every job with the Done Right Promise and The Keystone Standard. This means we register both layers of the manufacturer’s warranty in writing before we leave your driveway. We don’t just install the door; we ensure the frame is perfectly square and the seal is tight. If it is not done right, we make it right, with no paperwork fights and no arguing. We are a locally-rooted company that plans to be in Coral Springs for another years, and we treat every home as if it were our own.
If you are ready to address your patio sliding doors, we are ready to help. Our team provides professional service with a focus on doing the job right the first time. Call (727) 261-2215 today to schedule your free estimate and see the difference that a second-generation glazier’s approach makes.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.